Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
RS485 bus multifunction sensor relay
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
50,50 €
EAN: 4010312314111
MPN: 30014028
Colis: 1
Délai de livraison estimé à notre entrepôt (environ):
4-6 weeks
Technical Information
| État de l’article | Nouveau |
| Nom du fabricant | RS485 bus multifunction sensor relay |
| Marque | ELTAKO |
| Catégories |
Sensors
|
| Pays d’origine | CN |
| Code du système harmonisé | 8526 9200 00 |
| Méthode de montage | DRA (adaptateur pour rail DIN) |
| Modèle | Autre |
| Nombre d'entrées | 5 |
| Système de bus KNX | No |
| Système de bus radio fréquent | Yes |
| Système de bus Powernet | No |
| Autres systèmes de bus | Aucun |
| Système de bus LON | No |
| Degré de protection (IP) | IP20 |
| Système de bus KNX radio | No |
Détails d’emballage
| Niveau d’emballage 1 | 4010312314111, 4010312314111 |
| Niveau d’emballage 2 | 4010312314111 |
| Niveau d’emballage 3 | 4010312314111 |
Téléchargements
Description
Multifunction sensor relay with display and 5 channels (brightness, twilight, wind, rain and frost) for the Eltako RS485 bus. Only 0.1 watt standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. Connection to the Eltako-RS485 bus. Bus cross wiring and power supply with jumper. This multifunction sensor relay evaluates the wireless telegrams of the wireless weather data transmitter module FWS61 and, dependent on the setting, issues switching commands directly to the RS485 bus and also to the wireless network in the display by means of the MODE and SET buttons. This also allows control over wireless actuators installed at decentralised positions. If only centrally installed actuators need to be addressed to control shading elements from the FWS61, it is sufficient to teach-in the FSB14s in these actuators using the PC Tool PCT14. An FMSR14 is then not required. For the function of the sensor relay FMSR14 it is necessary that a device address is assigned from the wireless antenna module FAM14, according to the manual.