Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
Wireless receiver antenna module
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
75,27 €
EAN: 4010312313848
MPN: 30014016
Colis: 1
Délai de livraison estimé à notre entrepôt (environ):
4-6 weeks
Technical Information
| État de l’article | Nouveau |
| Nom du fabricant | Wireless receiver antenna module |
| Marque | ELTAKO |
| Catégories |
Sensors
|
| Pays d’origine | CN |
| Code du système harmonisé | 8526 9200 00 |
| Méthode de montage | Montage en surface (plâtre) |
| Système de bus KNX | No |
| Système de bus radio fréquent | Yes |
| Système de bus Powernet | No |
| Type de fixation | Autre |
| Largeur en nombre d'espacements modulaires | 0 |
| Autres systèmes de bus | Aucun |
| Système de bus LON | No |
| Système de bus KNX radio | No |
| Fréquence radio bidirectionnelle | Yes |
Détails d’emballage
| Niveau d’emballage 1 | 4010312313848, 4010312313848 |
| Niveau d’emballage 2 | 4010312313848 |
| Niveau d’emballage 3 | 4010312313848 |
Téléchargements
Description
Wireless receiver antenna module for the RS485 sub-bus. Only 0.5 watt standby loss. SMA socket for small enclosed antenna. The reception range can be increased by placing a larger wireless antenna FA250*, FA200* or FAG55E- in the optimised position. Housing dimensions LxWxH: 78x40x22mm. Up to three wireless receiver modules in a separate mini-housing can be installed at any point in the building in addition to an FAM14 and connected via a Gateway FGW14 to the main bus by a 4-wire screened sub-bus line (e.g. telephone line). Therefore connect the terminals RSA/RSB of the FEM with the terminals RSA2/RSB2 of the FGW14 . Also connect the terminals +12V/GND of the FEM with the terminals +12V/GND of the FGW14. Wiring of several FEM should take place with a line in the form of a chain, as prescribed in RS485 bus systems. A radial wiring with one line per FEM is not allowed. In each of the three wireless receiver modules, the jumper must be plugged into a different position. For this purpose, carefully open the housing on the narrow side with a screwdriver at the side provided. Blade width 6.5mm, max. 1.5mm thick.