Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
Impulse switch with tungsten pre-contact, 1 NO contact 16A
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
47,43 €
EAN: 4010312206744
MPN: 21100801
Colis: 1
Délai de livraison estimé à notre entrepôt (environ):
2-4 weeks
Technical Information
| État de l’article | Nouveau |
| Nom du fabricant | Impulse switch with tungsten pre-contact, 1 NO contact 16A |
| Marque | ELTAKO |
| Catégories |
Relais
|
| Pays d’origine | CN |
| Code du système harmonisé | 8536 4900 00 |
| Méthode de montage | Rail DIN |
| Fonction | Interrupteur électronique |
| Tension de contrôle 1 | 8-230 V |
| Type de tension de commande 1 | AC/DC |
| Courant nominal de commutation | 16 A |
| Nombre de contacts comme contact normalement ouvert | 1 |
Détails d’emballage
| Niveau d’emballage 1 | 4010312206744, 4010312206744 |
| Niveau d’emballage 2 | 4010312206744 |
| Niveau d’emballage 3 | 4010312206744 |
Autres données techniques
| Profondeur d'encastrement | 58 mm |
| Largeur en nombre d'espacements modulaires | 1 |
| Tension de commande 2 | 230 V |
| Type de tension de commande 2 | AC |
| Tension de contrôle de la fréquence 1 | 50 Hz |
| Tension de commande de fréquence 2 | 50 Hz |
| Adapté au fonctionnement manuel | No |
| Courant de commutation maximal (cos phi = 0,6) | 4 A |
| Charge max. lampe à incandescence | 3300 W |
| Charge max. lampe fluorescente | 1000 VA |
| Charge max. lampe fluorescente (circuit Duo) | 1000 VA |
| Charge maximale lampe fluorescente (parallèle compensée) | 500 VA |
| Nombre de contacts comme contact normalement fermé | 0 |
| Nombre de contacts comme contact inverseur | 0 |
Téléchargements
Description
1 NO contact potential free 16A/250V AC with tungsten pre-contact. 230V LED lamps up to 600W, incandescent lamp load up to 3300W. Max. inrush current 500A/2ms. No standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. With the patented Eltako Duplex technology (DX) the normally potential-free contacts can still switch in zero passage when switching 230V AC 50Hz and therefore drastically reduce wear. Simply connect the neutral conductor to the terminal (N) and L to 1(L) for this. This gives a standby consumption of only 0.1 Watt. Universal control voltage 8 to 230V UC. Low switching noise. No permanent power supply necessary, therefore no standby loss. By using a bistable relay coil power loss and heating are avoided even in the on mode. The relay contact can be open or closed during start-up. It is synchronised at first operation. The electronics does not have an internal power supply and therefore no power is consumed in any contact position. A control current flows only during a short control impulse of 0.2 seconds. This activates the microcontroller, reads the last switching state from the non-voltage memory, switches the bistable relay to its opposite state accordingly and rewrites the new switching state to memory.