Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
Impulse switch, 1 NO contact 10A
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
37,61 €
EAN: 4010312107966
MPN: 61100501
Colis: 1
Délai de livraison estimé à notre entrepôt (environ):
2-4 weeks
Technical Information
| État de l’article | Nouveau |
| Nom du fabricant | Impulse switch, 1 NO contact 10A |
| Marque | ELTAKO |
| Catégories |
Relays
|
| Pays d’origine | CN |
| Code du système harmonisé | 8536 5080 00 |
| Méthode de montage | Autre |
| Fonction | Autre |
| Profondeur d'encastrement | 18 mm |
| Largeur en nombre d'espacements modulaires | 3.1 |
| Tension de contrôle 1 | 8-230 V |
| Tension de commande 2 | 230 V |
| Type de tension de commande 1 | AC/DC |
| Type de tension de commande 2 | AC |
| Adapté au fonctionnement manuel | No |
| Type de tension d'alimentation | AC |
| Tension d'alimentation | 250 V |
| Courant de commutation maximal (cos phi = 0,6) | 4 A |
| Charge max. lampe à incandescence | 2000 W |
| Charge max. lampe fluorescente | 1000 VA |
| Charge max. lampe fluorescente (circuit Duo) | 1000 VA |
| Charge maximale lampe fluorescente (parallèle compensée) | 500 VA |
| Courant nominal de commutation | 10 A |
| Nombre de contacts comme contact normalement fermé | 0 |
| Nombre de contacts comme contact normalement ouvert | 1 |
| Nombre de contacts comme contact inverseur | 0 |
Détails d’emballage
| Niveau d’emballage 1 | 4010312107966, 4010312107966 |
| Niveau d’emballage 2 | 4010312107966 |
| Niveau d’emballage 3 | 4010312107966 |
Téléchargements
Description
1 NO contact potential free 10A/250V AC. 230V LED lamps up to 200W, incandescent lamp load up to 2000W. No standby loss. For installation. 45mm long, 45mm wide, 18mm deep. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. Either universal control voltage 8 to 230V UC at the control input +A1/-A2 or 230V with a glow lamp current up to 5mA at the control input (L)/-A2(N). Using two potentials simultaneously at the control inputs is not permitted. Very low switching noise. No permanent power supply necessary, therefore no standby loss. By using a bistable relay coil power loss and heating is avoided even in the on mode. The relay contact can be open or closed when putting into operation. It will be synchronised at first operation. If this impulse switch is in a circuit, which is monitored by a FR12-230V mains disconnection relay, no additional base load is required. However, the monitoring voltage of the FR12-230V must be set to max. The electronics does not have an internal power supply and therefore no power is consumed in any contact position. A control current flows only during a short control impulse of 0.2 seconds. This activates the microcontroller, reads the last switching state from the non-voltage memory, switches the bistable relay to its opposite state accordingly and rewrites the new switching state to memory.
Alternative gtin
In stock: No
FINDER
ELECTRONIC STEP RELAY
28,40 €
par pièce
Sous-total: 142,00 €
MOQ: 5
EAN: 8012823336619
MPN: 139182300000
Colis: 1