Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
Switching relay, 1 NO contact 16 A
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
33,64 €
EAN: 4010312205402
MPN: 22100002
Colis: 1
Délai de livraison estimé à notre entrepôt (environ):
4-6 weeks
Technical Information
| État de l’article | Nouveau |
| Nom du fabricant | Switching relay, 1 NO contact 16 A |
| Marque | ELTAKO |
| Catégories |
Relays
|
| Pays d’origine | CN |
| Code du système harmonisé | 8536 4900 00 |
| Méthode de montage | Rail DIN |
| Fonction | Partiellement électronique |
| Profondeur d'encastrement | 58 mm |
| Courant nominal | 16 A |
| Largeur en nombre d'espacements modulaires | 1 |
| Tension de contrôle 1 | 8-230 V |
| Type de tension de commande 1 | AC/DC |
| Tension de contrôle de la fréquence 1 | 50 Hz |
| Type de tension d'alimentation | AC |
| Tension d'alimentation | 250 V |
| Courant de commutation maximal (cos phi = 0,6) | 4 A |
| Charge max. lampe à incandescence | 2000 W |
| Charge max. lampe fluorescente | 1000 VA |
| Charge max. lampe fluorescente (circuit Duo) | 1000 VA |
| Charge maximale lampe fluorescente (parallèle compensée) | 500 VA |
| Nombre de contacts comme contact normalement fermé | 0 |
| Nombre de contacts comme contact normalement ouvert | 1 |
| Nombre de contacts comme contact inverseur | 0 |
Détails d’emballage
| Niveau d’emballage 1 | 4010312205402, 4010312205402 |
| Niveau d’emballage 2 | 4010312205402 |
| Niveau d’emballage 3 | 4010312205402 |
Téléchargements
Description
Switching relay. No standby loss. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. Simply connect the neutral conductor to the terminal (N) and L to 1(L) for this. This gives an standby consumption of only 0.1 Watt. If the contact is used for controlling switching devices which do not perform zero passage switching themselves, (N) should not be connected because the additional closing delay otherwise causes the opposite effect. Very low switching noise. Contact position indicator with LED. Same terminal connection as electromechanical switching relay R12-100-. By using a bistable relay coil power loss and heating is avoided even in the on mode. The relay contact can be open or closed when putting into operation. It will be synchronised at first operation. This relay is not suitable to feed back the switching voltage signal of a dimmer switch. The electronics does not have an internal power supply and therefore no standby loss. The microcontroller is activated when the control contact closes. This switches the bistable relay to the correct direction. The bistable relay switches back either when the control contact opens or when the control voltage falls.