Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
Switching relay, 2 NO contacts 16A
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
37,09 €
EAN: 4010312205433
MPN: 22200002
Colis: 1
Délai de livraison estimé à notre entrepôt (environ):
2-4 weeks
Technical Information
| État de l’article | Nouveau |
| Nom du fabricant | Switching relay, 2 NO contacts 16A |
| Marque | ELTAKO |
| Catégories |
Relays
|
| Pays d’origine | CN |
| Code du système harmonisé | 8536 4900 00 |
| Méthode de montage | Rail DIN |
| Fonction | Partiellement électronique |
| Profondeur d'encastrement | 58 mm |
| Courant nominal | 16 A |
| Largeur en nombre d'espacements modulaires | 1 |
| Tension de contrôle 1 | 8-230 V |
| Type de tension de commande 1 | AC/DC |
| Tension de contrôle de la fréquence 1 | 50 Hz |
| Type de tension d'alimentation | AC |
| Tension d'alimentation | 250 V |
| Courant de commutation maximal (cos phi = 0,6) | 4 A |
| Charge max. lampe à incandescence | 2000 W |
| Charge max. lampe fluorescente | 1000 VA |
| Charge max. lampe fluorescente (circuit Duo) | 1000 VA |
| Charge maximale lampe fluorescente (parallèle compensée) | 500 VA |
| Nombre de contacts comme contact normalement fermé | 0 |
| Nombre de contacts comme contact normalement ouvert | 2 |
| Nombre de contacts comme contact inverseur | 0 |
Détails d’emballage
| Niveau d’emballage 1 | 4010312205433, 4010312205433 |
| Niveau d’emballage 2 | 4010312205433 |
| Niveau d’emballage 3 | 4010312205433 |
Téléchargements
Description
2 NO contacts potential free 16A/250V AC. 230V LED lamps up to 200W, incandescent lamp load 2000W. No standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. Universal control voltage 8 to 230V UC. Very low switching noise. Contact position indicator with LED. Maximum current across both contacts 16A for 230V. Same terminal connection as electromechanical switching relay R12-200-. By using a bistable relay coil power loss and heating is avoided even in the on mode. The relay contact can be open or closed when putting into operation. It will be synchronised at first operation. This relay is not suitable to feed back the switching voltage signal of a dimmer switch. Use only relays ESR12DDX-UC, ESR12NP-230V+UC or ESR61NP-230V+UC for this purpose. The electronics does not have an internal power supply and therefore no standby loss. The microcontroller is activated when the control contact closes. This switches the bistable relay to the correct direction. The bistable relay switches back either when the control contact opens or when the control voltage falls.