DRAF12-14P 250-500V50/60HZ DRAF12-14P
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
115,80 €
par pièce
Ce prix est valable jusqu’au 31.12.30
Délai de livraison estimé à notre entrepôt (environ):
Sur demande
Technical Information
État de l’article |
Nouveau |
Nom du fabricant |
DRAF16-14P 250-500V50/60HZ Contactor Starter |
Marque |
ABB
|
Catégories |
Marking Plates and Enclosures
|
Code du système harmonisé |
8536 4900 00
|
Nombre de positions de commande |
2 |
Couleur du couvercle du boîtier |
Autre |
Matériau du boîtier |
Plastique |
Type de construction du boîtier |
Boîtier de montage en surface |
Degré de protection (IP) |
IP66 |
Détails d’emballage
Niveau d’emballage 1 |
3471522145048 |
Autres données techniques
Largeur |
107 mm |
Hauteur |
230 mm |
Profondeur |
131 mm |
Diamètre des ouvertures |
20 mm |
Degré de protection (NEMA) |
4X |
Qualité du matériau du boîtier |
ABS |
Téléchargements
Description
The DRAF16-14P is an enclosed Direct-On-Line starter with an AF contactor used for controlling 3-phase asynchronous motors up to 690 V AC.
Each starter is delivered assembled and wired. It contains:
• IP66 and type 4X plastic enclosure with double insulation, equiped with:
- 1 green flush "I" ON button and 1 red protruding "O" OFF/RESET button
- 4 cable inlets and outlets via knockouts: mm cable inlet/outlet suitable for IEC starter types.
• 1 AF16-30-10-14 3-pole contactor with holding contact
• DRAF..P with phase-to-phase control supply:
AC control supply: 250-500V50/60HZ
• 1 CB5-10 start contact block
• 1 PE and 1 neutral terminal
• TF42 thermal overload relay to be ordered separately and chosen according to motor's nominal current.