Technical Information
| État de l’article |
Nouveau |
| Nom du fabricant |
DRAF16-13N 100-250V50/60HZ Contactor Starter |
| Marque |
ABB
|
| Catégories |
Marking Plates and Enclosures
|
| Code du système harmonisé |
8536 4900 00
|
| Nombre de positions de commande |
2 |
| Couleur du couvercle du boîtier |
Autre |
| Matériau du boîtier |
Plastique |
| Type de construction du boîtier |
Boîtier de montage en surface |
| Degré de protection (IP) |
IP66 |
Détails d’emballage
| Niveau d’emballage 1 |
3471522144737 |
Autres données techniques
| Largeur |
107 mm |
| Hauteur |
230 mm |
| Profondeur |
131 mm |
| Diamètre des ouvertures |
20 mm |
| Degré de protection (NEMA) |
4X |
| Qualité du matériau du boîtier |
ABS |
Téléchargements
Description
The DRAF16-13N is an enclosed Direct-On-Line starter with an AF contactor used for controlling 3-phase asynchronous motors up to 690 V AC.
Each starter is delivered assembled and wired. It contains:
• IP66 and type 4X plastic enclosure with double insulation, equiped with:
- 1 green flush "I" ON button and 1 red protruding "O" OFF/RESET button
- 4 cable inlets and outlets via knockouts: mm cable inlet/outlet suitable for IEC starter types.
• 1 AF16-30-10-13 3-pole contactor with holding contact
• DRAF..N with phase-to-neutral control supply:
AC control supply: 100-250V50/60HZ
• 1 CB5-10 start contact block
• 1 PE and 1 neutral terminal
• TF42 thermal overload relay to be ordered separately and chosen according to motor's nominal current.