Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
DEHNgap H M, N-PE lightning current arrester image 1
DEHNgap H M, N-PE lightning current arrester image 2
DEHNgap H M, N-PE lightning current arrester image 3
DEHNgap H M, N-PE lightning current arrester thumbnail 1
DEHNgap H M, N-PE lightning current arrester thumbnail 2
DEHNgap H M, N-PE lightning current arrester thumbnail 3

DEHNgap H M, N-PE lightning current arrester

En stock: Non Stock fournisseur: Non Quantité minimale de commande: 1
Prix (hors TVA):
313,56 €
Ce prix est valable jusqu’au 31.12.25
EAN: 4013364118690
MPN: 961102
Colis: 1
Délai de livraison estimé à notre entrepôt (environ): 2 weeks

Technical Information

État de l’article Nouveau
Nom du fabricant DEHNgap H M, N-PE lightning current arrester
Marque Dehn
Catégories Surge Protection Devices (SPD)
Pays d’origine DE
Code du système harmonisé 8536 3030 00
Méthode de montage Rail DIN (rail chapeau) 35 mm
Courant d'impulsion de la foudre (10/350 µs) 100 kA
Niveau de protection de la tension 4 kV
Capacité d'extinction du courant de suite 0.1 kA
Tension continue max. AC 255 V
Catégorie type 1 Yes
Degré de protection (IP) IP20

Détails d’emballage

Niveau d’emballage 1 4013364118690, 4013364118690

Autres données techniques

Nombre de conducteurs (sans mise à la terre) 1
Taille de la construction 2 espacements modulaires
Section maximale du conducteur solide (solide, toronné) 50 mm²
Section maximale des conducteurs flexibles (brins fins) 35 mm²
Énergie spécifique (W/R) 2500 kJ/Ohm
Configuration du système TT Yes

Téléchargements

Description

Single-pole DEHNgap modular N-PE lightning current arrester (type 1 according to EN 61643-11). Total current arrester specifically designed for installation in 3+1 and 1+1 circuits of TT systems according to IEC 60364-5-53 between neutral conductor N and protective conductor PE. For protecting low-voltage consumer’s installations against surges and even direct lightning strikes. For installation in conformity with the lightning protection zone concept at the boundaries from 0A – 1 (3+1 circuit).