Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
DCS btn I/F 2-g Door communication image 1
Gira

DCS btn I/F 2-g Door communication

Commande uniquement
Prix (hors TVA):
38,60 €
Ce prix est valable jusqu’au 28.02.26
EAN: 4010337210009
MPN: 121000
Colis: 1
Délai de livraison estimé à notre entrepôt (environ): 4-6 weeks

Technical Information

État de l’article Nouveau
Nom du fabricant DCS btn I/F 2-g Door communication
Marque Gira
Catégories Door Entry Systems
Pays d’origine* DE
* The actual country of origin may differ depending on the delivery batch. To confirm the specific country of origin, please contact your account manager.
Code du système harmonisé 8542 3190 00
Fonction Agrandir

Détails d’emballage

Niveau d’emballage 1 4010337210009
Niveau d’emballage 2 4010337210009

Autres données techniques

Largeur 0 mm
Hauteur 0 mm
Profondeur 0 mm
Technique d'installation Système de bus
Largeur en nombre d'espacements modulaires 0

Description

DCS button interface, 2-gang Features: The DCS button interface, 2-gang is used to implement a zero-voltage button signal on the Gira door communication BUS. The DCS button interface has two mutually independent inputs for the connection of zero-voltage buttons. The inputs can either be used for triggering a switching action (e.g. switching lights) via a switching actuator or flush-mounted switching actuator, or it can be assigned to a home station. The DCS button interface is intended for installation in a device box behind a conventional button. Notes : The button is connected via a 3.wire connection line which is approx. 20 cm long. This connection line can be extended to a maximum of 5 m. If the button interface is assigned to a home station, the two inputs have differing functions: Input 1 triggers a floor call. This input is required when only a two-wire cable is available for connecting a home station including the floor-call button (e.g. when retrofitting an existing door intercom). Input 2 triggers a door call. This input is required when the automatic door opener of the home station is to be triggered via a mechanical button.