Technical Information
| État de l’article |
Nouveau |
| Nom du fabricant |
1-way pushbutton, +LED, radio, 55x55 mm |
| Marque |
EATON
|
| Catégories |
Bus System Devices (KNX/Modbus)
|
| Pays d’origine |
CZ |
| Code du système harmonisé |
8536 5011 00
|
| Modèle |
Autre |
| Système de bus KNX |
No |
| Système de bus radio fréquent |
Yes |
| Avec connexion de bus |
Yes |
| Autres systèmes de bus |
Aucun |
| Système de bus LON |
No |
| Système de bus KNX radio |
No |
| Fréquence radio bidirectionnelle |
Yes |
Détails d’emballage
| Niveau d’emballage 1 |
4015081236190 |
| Niveau d’emballage 2 |
9008790805011 |
Autres données techniques
| Méthode de montage |
Montage en surface (plâtre) |
| Couleur |
Gris |
| Protection de surface |
Non traité |
| Nombre de canaux |
1 |
| Qualité des matériaux |
Thermoplastique |
| Matériau |
Plastique |
| Numéro RAL (similaire) |
7035 |
| Transparent |
No |
| Finition de la surface |
Mat |
Description
When actuated, the pushbutton sends to the actuators of the comfortable electrical installation. LEDs indicate if the signal has been sent, understood correctly and if a confirmation has been returned, but doe not give any feedback about the actual switching state of the actuator. There is no difference between blind dimmer, etc. or two-way, crossover switches or blind pushbutton, etc. necessary. the device is powered with a round cell battery and can therefore easily be mounted anywhere (screwed and glued). NO switch, branch or installation box is required due to the flat design . the pushbutton is compatible with many 55 mm frames from the switch industry (observe the compatibility list). battery included as standard.