CP-C.1 24/10.0 Power supply In:100-240VAC/90-300VDC Out:DC 24V/10A
En stock: Non
Stock fournisseur: Oui
Quantité minimale de commande: 1
Prix (hors TVA):
983,19 €
par pièce
Ce prix est valable jusqu’au 31.12.30
Délai de livraison estimé à notre entrepôt (environ):
Sur demande
Technical Information
État de l’article |
Nouveau |
Nom du fabricant |
CP-C.1 24/20.0 Power supply In:100-240VAC/90-300VDC Out:DC 24V/20A |
Marque |
ABB
|
Catégories |
AC/DC Power Supply Units
|
Largeur |
82 mm |
Hauteur |
129.4 mm |
Profondeur |
136 mm |
Type de tension d'alimentation |
AC/DC |
Puissance de sortie |
480 W |
Possibilité de montage sur rail |
Yes |
Possibilité de montage mural |
No |
Tension d'alimentation nominale à AC 50 Hz |
85-264 V |
Courant de sortie max. 1 |
26 A |
Détails d’emballage
Niveau d’emballage 1 |
4013614503832 |
Autres données techniques
Hauteur d'encastrement |
129.4 mm |
Consommation électrique |
508 VA |
Version modulaire |
No |
Adapté aux fonctions de sécurité |
No |
Tension de sortie stabilisée |
Yes |
Type de connexion électrique |
Raccordement à vis |
Stabilisé |
Yes |
Degré de protection (IP) |
IP20 |
Montage direct possible |
No |
Tension secondaire réglable |
No |
Tension d'alimentation nominale à AC 60 Hz |
85-264 V |
Tension d'alimentation nominale en courant continu |
90-300 V |
Protection contre les courts-circuits |
Yes |
Niveau de performance selon EN ISO 13849-1 |
Aucun |
Courant de sortie max. 2 |
0 A |
Courant de sortie max. 3 |
0 A |
SIL selon IEC 61508 |
Aucun |
Degré de protection (NEMA) |
1 |
Téléchargements
Description
The CP-C.1 24/20.0 is a power supply from the CP-C.1 range. The primary switch mode power supply offers a wide range input of 85-264 V AC and 90-300 V DC, rated input voltage is 110-240 V AC. The rated output power is 480 W, rated output current is 20 A at an output voltage of 24 V DC. The output voltage is adjustable within a range of 22.5 to 28.5 V DC. The power supply provides a U/I output characteristic with a power reserve of up to 30 % and allows parallel operation to increase capacity and to enable redundancy. Further features are: power factor correction acc. to EN 61000-3-2. Redundancy unit and buffer modules are available as accessories