Contact element, Screw terminals, Front fixing, 1 N/O, 24 V 3 A, 220 V 230 V 240 V 6 A
En stock: Oui
Stock fournisseur: Oui
Quantité minimale de commande: 20
Ce prix est valable jusqu’à 31.12.25 ou jusqu’à épuisement du stock
Sous-total: 41,20 €
MOQ: 20
Délai de livraison estimé à notre entrepôt (environ):
1-4 weeks
Technical Information
État de l’article |
Nouveau |
Nom du fabricant |
M22-K10 Contact element, Screw terminals, Front fixing, 1 N/O, 24 V 3 A, 220 V 230 V 240 V 6 A |
Marque |
EATON
|
Catégories |
Signal & Control Modules
|
Pays d’origine |
DE |
Code du système harmonisé |
8536 5080 00
|
Méthode de montage |
Fixation frontale |
Modèle |
Montage par le haut et intégrable |
Courant nominal de fonctionnement Ie à AC-15, 230 V |
6 A |
Type de connexion électrique |
Raccordement à vis |
Nombre de contacts comme contact normalement fermé |
0 |
Nombre de contacts comme contact normalement ouvert |
1 |
Nombre de contacts comme contact inverseur |
0 |
Détails d’emballage
Niveau d’emballage 1 |
4015082163761 |
Niveau d’emballage 2 |
4015081846108 |
Autres données techniques
Support de lampe |
Aucun |
Nombre d'interrupteurs de signalisation de défaut |
0 |
Description
Contact element, Standard/Approval: UL/CSA, IEC, Construction size: NZM1/2/3/4, Connection technique: Screw terminals, Fixing: Front fixing, Contacts N/O = Normally open: 1 N/O, Degree of Protection: IP20, Connection to SmartWire-DT: no, Connection type: Single contact, Description of HIA trip-indicating auxiliary contact: General trip indication '+', when tripped by shunt release, overload release, short-circuit release or by the residual-current release due to residual-current., Can be used with NZM1, 2, 3 circuit-breaker: a trip-indicating auxiliary contact can be clipped into the circuit-breaker. , Can be used with NZM4 circuit-breaker: up to two standard auxiliary contacts can be clipped into the circuit-breaker., Any combinations of the auxiliary contact types are possible., Not in combination with switch-disconnector PN…, Marking on switch: HIA, Labeling in FI-Block: HIAFI., ., Description standard auxiliary contact HIN: Switching with the main contacts Used for indicating and interlocking tasks. , Can be used with NZM1 circuit-breaker: a standard auxiliary contact can be clipped into the circuit-breaker., Can be used with NZM2 size circuit-breaker: a standard auxiliary contact can be clipped into the circuit-breaker., Can be used with NZM3, 4 circuit-breaker: up to three standard auxiliary contacts can be clipped into the circuit-breaker., Any combinations of the auxiliary contact types are possible., Marking on switch: HIN., On combination with remote operator NZM-XR... the right mounting location of standard auxiliary contact HIN can be fitted only with individual contacts.