Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
Similar figure image 1

Connection module dig. IOs, TPOo optocoupler module, 8 O, push in, LED

En stock: Non Stock fournisseur: Non Quantité minimale de commande: 1
Prix (hors TVA):
191,19 € par pièce
Ce prix est valable jusqu’au 24.12.25
EAN: 4025515153795
MPN: 6ES7924-0BF20-0BC0
Boîte: 1
Délai de livraison estimé à notre entrepôt (environ): 4-6 weeks

Technical Information

État de l’article Nouveau
Nom du fabricant Connection module dig. IOs, TPOo optocoupler module, 8 O, push in, LED
Marque Siemens
Catégories Cable caps and connectors, clamps
Pays d’origine RO
Code du système harmonisé 8536 9010 00
Méthode de montage Rail DIN (rail chapeau) 35 mm
Couleur Gris
Largeur UN mm
Hauteur UN mm
Profondeur UN mm
Tension nominale 50 V
Lampe de couleur Autre
Température de fonctionnement 0-60 °C
Classe d'inflammabilité du matériau isolant selon UL94 V1
Plaque de fermeture nécessaire No
Type de connexion électrique 1 Connexion enfichable
Type de connexion électrique 2 Connexion à perforation d'isolant
Avec connexion PE No
Avec connexion de blindage No
Avec fonction d'alimentation Yes
Commutation par LED pour PNP
Nombre de niveaux 1
Nombre de positions de serrage par niveau 1
Étages connectés à l'intérieur No
Connexion croisée No
Fonction de déconnexion No
Section du conducteur raccordable à âme pleine UN mm²
Section du conducteur raccordable à brins fins avec manchon d'extrémité de câble 0.199999999-2.5 mm²
Section du conducteur raccordable à brins fins sans manchon d'extrémité de câble 0.199999999-2.5 mm²
Section des conducteurs connectables multi-câblés 0.199999999-2.5 mm²
Matériau corps isolant Autre
Courant nominal In 1 A
Version antidéflagrante "Ex e No

Détails d’emballage

Niveau d’emballage 1 4025515153795

Description

Connection module TPOO with optocoupler 24 VDC, Output 8 NO contacts 24V DC/4 A Overload and short circuit-proof, with LED Push-in terminal VPE = 1 unit 16 pole IDC connector f. cable The TPOo connection module with optocoupler and potential feed terminals (24VDC) for the connection of 8 digital outputs (24VDC) for potential adaption/isolation, contact designed as normally open contact, with push-in terminals and LED for signalling forms the interface between the connection cables of the peripherals supplied from the field and the SIMATIC S7. This is mounted on the DIN rail and, thanks to its functionality with push-in terminals, is precisely adapted to the respective task. This connection module is part of the fully modular SIMATIC TOP connect connection for the fastest and safest system cabling. In addition to low wiring costs, error sources in cabling can be significantly reduced. Sensors and actuators from the peripherals are combined with the connection modules of SIMATIC TOP connect and connected to the SIMATIC S7-300/1500 via cable and front plug-in module.