Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
Comb. arr. Type 1+2 DEHNshield ZP Basic for three-phase TT and TN-S sy image 1
Comb. arr. Type 1+2 DEHNshield ZP Basic for three-phase TT and TN-S sy image 2
Comb. arr. Type 1+2 DEHNshield ZP Basic for three-phase TT and TN-S sy image 3
Comb. arr. Type 1+2 DEHNshield ZP Basic for three-phase TT and TN-S sy thumbnail 1
Comb. arr. Type 1+2 DEHNshield ZP Basic for three-phase TT and TN-S sy thumbnail 2
Comb. arr. Type 1+2 DEHNshield ZP Basic for three-phase TT and TN-S sy thumbnail 3

Comb. arr. Type 1+2 DEHNshield ZP Basic for three-phase TT and TN-S sy

En stock: Non Stock fournisseur: Non Quantité minimale de commande: 1
Prix (hors TVA):
179,18 €
Ce prix est valable jusqu’au 24.12.25
EAN: 4013364306783
MPN: 900396
Colis: 1
Délai de livraison estimé à notre entrepôt (environ): 4-6 weeks

Technical Information

État de l’article Nouveau
Nom du fabricant Comb. arr. Type 1+2 DEHNshield ZP Basic for three-phase TT and TN-S sy
Marque Dehn
Catégories Lighting protection
Pays d’origine DE
Code du système harmonisé 8536 3090 00
Méthode de montage Barre omnibus
Courant d'impulsion de la foudre (10/350 µs) 30 kA
Nombre de pôles 4
Taille de la construction 3 espacements modulaires
Capacité d'extinction du courant de suite 25 kA
Tension continue max. AC 255 V
Tension nominale AC 230 V
Classe d'essai Type 1 + 2
Niveau de protection de la tension L-N 1.5 kV
Signalisation sur l'appareil Optique
Degré de protection (IP) IP30
Niveau de protection de la tension N-PE 1.5 kV
Énergie spécifique (W/R) 225 kJ/Ohm
Effet de protection coordonné sur le plan énergétique par rapport à l'équipement terminal Yes
Configuration du système TN-S Yes
Configuration du système TT Yes

Détails d’emballage

Niveau d’emballage 1 4013364306783, 4013364306783

Téléchargements

Description

DEHNshield ZP Basic multipole spark-gap-based combined lightning current and surge arrester type 1 + type 2 according to EN 61643-11. Can be directly snapped onto a 40 mm busbar system in the meter panel without tools. Capable of protecting terminal equipment. For protecting low-voltage consumer´s installations against surges and even direct lightning strikes. Fulfils all requirements of IEC 60364-5-53. Can be directly installed at the infeed of the electrical installation in the residential building.