C60PV-DC - 2P - 16A - 800 V - B curve
En stock: Non
Stock fournisseur: Oui
Quantité minimale de commande: 1
Ce prix est valable jusqu’au 31.12.25
Colis: 1
Boîte: 30
Palette: 240
Délai de livraison estimé à notre entrepôt (environ):
Sur demande
Technical Information
État de l’article |
Nouveau |
Nom du fabricant |
C60PV-DC - 2P - 16A - 800 V - B curve |
Marque |
Schneider Electric
|
Catégories |
Disjoncteurs 16A
|
Pays d’origine |
CN |
Code du système harmonisé |
8536 2010 00
|
Courant nominal |
16 A |
Tension nominale |
800 V |
Caractéristique de déclenchement |
B |
Largeur en nombre d'espacements modulaires |
4 |
Nombre de pôles (total) |
2 |
Pouvoir de coupure assigné en cas de court-circuit Icn selon EN 60898 à 230 V |
0 kA |
Détails d’emballage
Niveau d’emballage 1 |
3606480504099 |
Niveau d’emballage 2 |
3606480504093 |
Niveau d’emballage 3 |
3606480504099 |
Autres données techniques
Type de tension |
DC |
Profondeur d'encastrement |
44 mm |
Fréquence |
50 Hz |
Tension nominale d'isolation Ui |
1000 V |
Classe de limitation de courant |
0 |
Catégorie de surtension |
4 |
Degré de pollution |
2 |
Antidéflagrant |
No |
Degré de protection (IP) |
Autre |
Nombre de pôles protégés |
2 |
Conducteur neutre à commutation simultanée |
No |
Section du conducteur raccordable à âme pleine |
1-25 mm² |
Section des conducteurs connectables multi-câblés |
1-16 mm² |
Température ambiante pendant le fonctionnement |
-25-70 °C |
Installation encastrée |
No |
Équipement supplémentaire possible |
Yes |
Pouvoir de coupure assigné en cas de court-circuit Icn selon EN 60898 à 400 V |
0 kA |
Pouvoir de coupure assigné en cas de court-circuit Icu selon IEC 60947-2 à 230 V |
0 kA |
Pouvoir de coupure assigné en court-circuit Icu selon IEC 60947-2 à 400 V |
0 kA |
Tension nominale de tenue aux chocs Uimp |
6 kV |
Téléchargements
Description
This Acti9 C60PV-DC is a low voltage miniature circuit breaker (MCB) dedicated to multi string photovoltaic installations. It is a 2P circuit breaker with 2 protected poles, 16A rated current and B tripping curve. It can be mounted on DIN rail for modular installation. Its width is 8 modules of 9mm. As circuit breaker, its breaking capacity, according to IEC/EN 60947-2, is 1.5kA at 800VDC and 3kA at 650VDC. It is designed to protect the cables located between each string of photovoltaic modules and the photovoltaic inverter against overloads and short circuits. It has an IP40 degree of protection (as per IEC/EN 60529) on its terminals in modular enclosure. Its fast closing mechanism, independent of the speed of actuation of the toggle, improves its service life. The tripping or position indication functions are remotely provided by adding electrical auxiliaries. The presence of the green strip guarantees physical opening of the contacts and allows operations to be performed on the downstream circuit in complete safety.