Technical Information
| État de l’article |
Nouveau |
| Nom du fabricant |
Acti9 - STD400LED+ DIN universal dimmer |
| Marque |
Schneider Electric
|
| Catégories |
PLC Units & I/O Modules
|
| Code du système harmonisé |
8537 1098 00
|
| Méthode de montage |
Rail DIN |
| Fonction |
Gradateur |
| Courant nominal |
2 A |
| Fréquence nominale |
50 Hz |
| Largeur en nombre d'espacements modulaires |
1 |
| Tension de contrôle 1 |
230 V |
| Type de tension de commande 1 |
AC |
| Tension nominale |
230 V |
| Courant de commutation maximal (cos phi = 0,6) |
0 A |
| Degré de protection (IP) |
IP20 |
Détails d’emballage
| Niveau d’emballage 1 |
3606480769252 |
| Niveau d’emballage 2 |
3606480769250 |
Autres données techniques
| Largeur |
18 mm |
| Hauteur |
85 mm |
| Profondeur |
60 mm |
| Programme astro |
No |
| Nombre de canaux |
1 |
| Programme hebdomadaire |
No |
| Simulation de présence |
No |
| Nombre de fonctions de gradation |
4 |
| Capacité de variation par canal |
400 W |
| Interrupteur de groupe |
No |
| Fonction panique |
No |
| Fonction de surtension, nombre de canaux |
0 |
| Fonction centrale OUT |
Yes |
| Éclairage de l'escalier et avertissement |
No |
| Fonction roulette, nombre de canaux |
0 |
| Nombre de canaux de variation universels |
1 |
| Commande de volets roulants/protection solaire, nombre de canaux |
0 |
| Extension des modules jusqu'à un nombre maximum de canaux |
0 |
Téléchargements
Description
STD400LED+, 400 W. For switching and dimming incandescent lamps, HV halogen lamps, LV halogen lamps using dimmable wound transformers or electronic transformers, LEDs and compact fluorescent lamps. (Leading and trailing-edge phases). The universal dimmer automatically recognises the connected load. The enclosed diode modules can be used to implement 2 push-button operation, for example (push-button 1: on/dim up, push-button 2: off/dim down), or to retrieve up to 3 lightscenes. In addition, you can set a dimming time for different functions. Combinations of inductive and capacitive loads must not be connected. For installation on DIN rails TH35 according to EN 60715. Functions: - Automatic load detection. -Initial brightness can be saved individually. -Adjustable minimum brightness (required for ESL and LEDs). Multi-voltage input, e.g. for intercom systems. -Memory function in event of power failure. -Automatic electronic overload and excess temperature switch off. Dimming switch-on function. -Permanent ON function (test function). -Soft ON and soft OFF to protect lamps. -No minimum load required. Comfort setting with wake-up and snooze function (can also be deactivated). -Adjustable dimming speed (for automatic functions). One and two push-button operation for easy operation. -Up to 3 lightscenes can be retrieved via separate input. Central OFF/ON for max. 10 dimming channels or lightscene for max. 10 devices possible with one push-button. -Staircase lighting function with dimming off function in accordance with DIN 18015 - 2. Rresettable, long-term function. -Can be controlled by push-button or switch, e.g. for combination with presence detectors or time switches. Nominal voltage: AC 230 V, +10% / -15%, 50 Hz. Power consumption: 0.3 W. Standby power: 0.2 W. Incandescent lamp load: 400 W. Halogen lamp load: 400 W. Inductive transformers: 400 W. Electronic transformers: 300 W. Dimmable compact fluorescent lamps (CFL): 80 W. Dimmable LEDs: 60 W. Cable length: max. 100 m. Minimum load: none. Operating elements: Function switch, dimming time setting. IP protection rating: IP 20. Device width: 1 modules, approx. 18 mm. Version: 400 W.