Acti9 PowerTag Link Display, color display, DIN rail
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
317,06 €
Ce prix est valable jusqu’au 31.12.25
Colis: 1
Boîte: 27
Palette: 216
Délai de livraison estimé à notre entrepôt (environ):
Sur demande
Technical Information
État de l’article |
Nouveau |
Nom du fabricant |
Acti9 PowerTag Link Display, color display, DIN rail |
Marque |
Schneider Electric
|
Catégories |
Bus System Devices (KNX/Modbus)
|
Pays d’origine |
CN |
Méthode de montage |
Montage encastré (plâtre) |
Affichage |
Couleur |
Système de bus KNX |
No |
Système de bus radio fréquent |
No |
Autres systèmes de bus |
Autre |
Système de bus LON |
No |
Degré de protection (IP) |
IP41 |
Fonction tactile |
No |
Détails d’emballage
Niveau d’emballage 1 |
3606481809629 |
Niveau d’emballage 2 |
3606481809627 |
Niveau d’emballage 3 |
3606481809629 |
Autres données techniques
Disposition de l'assemblage |
Autre |
Couleur |
blanc |
Modèle |
Panneau de signalisation et de commande |
Qualité des matériaux |
Thermoplastique |
Système de bus Powernet |
No |
Avec connexion de bus |
Yes |
Champ de texte |
Yes |
Matériau |
Plastique |
Numéro RAL (similaire) |
9001 |
Interfaces supplémentaires |
Autre |
Système de bus KNX radio |
No |
Fréquence radio bidirectionnelle |
No |
Téléchargements
Description
The PowerTag Link Display is the wireless local HMI of the PowerTag System. Thanks to this device combined with the PowerTag Link gateway, you can monitor your energy locally into any electrical distribution system. Indeed, it will display on the front door of your electrical panel the values collected by wireless energy sensors. Such as measured current, voltage, power factor, power and energy. The display can be installed on a DIN rail, clipped-on by its power supply, or as said flush mounted on the front door. To go further, the PowerTag Link Display gives alarms locally. Therefore, it helps to improve your operational efficiency, and to reduce the impact of downtime. The power supply can be supplied with a 110 to 277 VAC, and will distribute 24 VDC to the display. The dimensions are 72 mm in width, 95 mm in height, 68 mm in depth for a total weight of 137 g. Device is complient with Electromagnetic and Radio Spectrum Matters standards EN 300 328, EN 301489-1 and EN 301489-17.