3M™ Heatshrink Cable End Cap SKE, 15/40, 15-32 mm
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
Prix sur demande
Ce prix est valable jusqu’à épuisement des stocks
Délai de livraison estimé à notre entrepôt (environ):
Sur demande
Technical Information
État de l’article |
Nouveau |
Nom du fabricant |
3M™ Heatshrink Cable End Cap SKE, 15/40, 15-32 mm |
Marque |
3M
|
Catégories |
Heat Shrink Tubing
|
Pays d’origine |
IN |
Code du système harmonisé |
3926 9097 00
|
Type de lame |
Thermorétractable |
Longueur totale après rétraction |
105 mm |
Diamètre intérieur avant thermorétraction |
40.005 mm |
Diamètre intérieur après thermorétraction |
15.011 mm |
Détails d’emballage
Niveau d’emballage 1 |
0638060414040 |
Autres données techniques
Couleur |
Noir |
Modèle |
Paroi mince |
Sans halogène |
Yes |
Matériau |
Polyoléfine (PO-X) |
Transparent |
No |
Avec colle intérieure |
Yes |
Diamètre nominal en pouces |
Autre |
Taux de rétraction |
2:01 |
Description
3M™ Heat Shrink End Cap SKE provides mechanical and environmental protection as well as sealing to cable ends. The semi rigid, flame retardant polyolefin construction makes the end cap suitable for heavy duty applications. The adhesive lining forms a permanent, flexible and water resistant barrier.3M™ SKE is a semi-rigid, cross-linked modified polyolefin heatshrink cable end cap with hot melt adhesive. Minimum shrink temperature is 120°C, operating temperature is -30°C to +135°C. SKE is RoHS compliant, halogen free and provides good corrosion resistance. On application of heat the adhesive melts and the part shrinks forming a perfect watertight seal. End caps are designed for quick and easy insulation, sealing of cable end for indoor and outdoor applications and provides resistance to abrasion, weathering and chemical attack. SKE is available in sizes from 8/4 mm to 126/63 mm with a wall thickness (recovered) of 2.5-4.0 mm and colour black. Standard packaging in bulk- or standard-pack.