Registrati per sbloccare i tuoi prezzi B2B esclusivi e iniziare ad acquistare. Registrati ora!

Home

Interruttori e prese

Dispositivi di comando

TR/U 1.1.ZA Card Reader Zenit Anthracite

TR/U 1.1.ZA Card Reader Zenit Anthracite image 1

TR/U 1.1.ZA Card Reader Zenit Anthracite image 2

TR/U 1.1.ZA Card Reader Zenit Anthracite

Solo su ordinazione

EAN: 8012542356837

MPN: 2CSY242210R5000

Confezione: 1

Prezzo (IVA esclusa)

178,96 €

per unità

Quantità minima d'ordine: 1

Tempo di consegna stimato al nostro magazzino: 4-6 weeks

Questo prezzo è valido fino al prossimo listino o fino a esaurimento scorte

Informazioni tecniche

Condizione dell'articolo	Nuovo
Nome del produttore	TR/U 1.1.ZA Card Reader Zenit Anthracite
Marchio	ABB
Categorie	Dispositivi di comando Sistemi di chiamata infermieristica
ETIM	EC002971

Dettagli dell'imballaggio

Livello di imballaggio 1

8012542356837

Descrizione

The "transponder reader" is a flush-mounting device for British Standard wall boxes, designed to realize access control systems with a communication support based on KNX bus. It is equipped with one relay (4A @24 V AC/DC) and one input to be used for connecting external conventional card-holder (e.g. Zenit wiring accessories card-holder). The output can be programmed in three different ways: "Linked to access control", receiving in this case switching commands from the device itself (according to transponder card validation); being a standard KNX Switch actuator output, able to be controlled by every KNX standard devices; "linked to card-holder", that means that the relay is switched according to closing/opening internal input contact available on transponder reader. The bicolor (red-green) LED placed on the front of the device allow you to monitor device operation and can be also switched ON/OFF in the proper color according to KNX telegram (for example for DND/MUR purposes). The transponder reader can be configured with ABB Access control software in order to behave as transponder programming device. The transponder reader requires a 12...24 V AC/DC external power supply to ensure its operation even with bus voltage failure.