Registrati per sbloccare i tuoi prezzi B2B esclusivi e iniziare ad acquistare. Registrati ora!
SJR/S 4.24.2.1 SJR/S4.24.2.1 SMI Blind/Roller Shutter Actuator, LoVo, 4-fold, MDRC image 1
SJR/S 4.24.2.1 SJR/S4.24.2.1 SMI Blind/Roller Shutter Actuator, LoVo, 4-fold, MDRC image 2
MD99 image 3
MD01 image 4
MD99 image 5
SJR/S 4.24.2.1 SJR/S4.24.2.1 SMI Blind/Roller Shutter Actuator, LoVo, 4-fold, MDRC image 6
SJR/S 4.24.2.1 SJR/S4.24.2.1 SMI Blind/Roller Shutter Actuator, LoVo, 4-fold, MDRC thumbnail 1
SJR/S 4.24.2.1 SJR/S4.24.2.1 SMI Blind/Roller Shutter Actuator, LoVo, 4-fold, MDRC thumbnail 2
MD99 thumbnail 3
MD01 thumbnail 4
MD99 thumbnail 5
SJR/S 4.24.2.1 SJR/S4.24.2.1 SMI Blind/Roller Shutter Actuator, LoVo, 4-fold, MDRC thumbnail 6

SE/S3.16.1 Energy Actuator, 3-fold, 16/20 A, MDRC

Solo su ordinazione
EAN: 4016779864466
MPN: 2CDG110143R0011
Confezione: 1
Prezzo (IVA esclusa)
876,64 €
per pz.
Quantità minima d'ordine: 1
Tempo di consegna stimato al nostro magazzino: Su richiesta
Prezzo valido fino al 31.12.27 o fino a esaurimento scorte

Informazioni tecniche

Condizione dell'articolo Nuovo
Nome del produttore SJR/S 4.24.2.1 SJR/S4.24.2.1 SMI Blind/Roller Shutter Actuator, LoVo, 4-fold, MDRC
Marchio ABB
Categorie Dispositivi bus KNX/Modbus
Codice del Sistema Armonizzato 8537 1091 00
ETIM EC001330
Tipo di fissaggio DRA (adattatore per guida DIN)
Sistema bus KNX Sì
Sistema bus Powernet No
Larghezza in moduli 4
Altri sistemi bus No
Comando locale/manuale Sì
Con indicatore LED Sì

Dettagli dell'imballaggio

Livello di imballaggio 1 4016779864466

Altri dati tecnici

Sistema bus radio No
Con comunicazione bus Sì
Sistema bus LON No
Grado di protezione (IP) IP20
Sistema bus radio KNX No
Radio bidirezionale No
Modulo bus rimovibile No
Profondità min. della scatola da incasso 64.5 mm

Download

Descrizione

It controls four independent groups (broadcast) with up to four SMI (Standard Motor Interface) LoVo drives for positioning blinds, roller shutters, awnings and other shading products. Status signals (motor fault, direction of movement) can also be sent from the SMI drive on the bus. Push buttons are located at the front of the device to control the outputs e.g. during commissioning. The current status of the output is displayed via LEDs.