RF Multi servo KNX Secure

RF Multi servo for KNX Features:-Battery-operated wireless servo for controlling heating valves via KNX RF Multi.-Installation on indoor radiators.-Compatible with heating valves with an M30 x 1.5-mm connection thread without the need for an adapter.-For Danfoss RA/RAV/RAVL, suitable adapters are included with screw and nut and a pin (only for RAV). These are mounted between the heating valve and the radiator thermostat.-Servos in the same room can be grouped for optimum control of multiple radiators.-Internal temperature sensor.-Integrated heating controller for absolute and relative heating control.-On-site operation (configurable) for target temperature adjustment, boot function and comfort extension.-Display showing the target temperature and diagnostics.-Configurable boost function.-Comfort extension/presence function.-Operating mode switchover (comfort, standby, night mode, frost protection).-Forced setting.-Service mode.-Automatic valve flushing.-Scene auxiliary unit for 16 scenes for operating mode adjustment with memory function.-Diagnostic fault and error messages are output directly on the device and/or via a KNX telegram.-The KNX bus displays the battery status.-For maintenance work, the servo can be moved to the variable 0 or 100% using the service mode function.-Supports KNX Data Secure communication.-Supports KNX Long Frames.-Can be fully updated and upgraded via KNX RF.-Typical outdoor wireless range 100 m.-Rated voltage: 2 x AA battery.-Typical battery life of two heating periods.Notes:-An RF Multi/TP media coupler for KNX is required for integration in a wired KNX system.Scope of supply:-2 x battery (AA). Typical service life of two heating periods-Adapter set (plastic adapter for Danfoss RA, RAV, RAVL and screw with nut).-Secure Card with data for KNX Secure.