- Home /
- Apparecchi di illuminazione /
- Strisce LED, moduli, profili e accessori /
- Accessori e ricambi per strisce e tubi luminosi /
- Profile GLAX for LED strip, corner surface-mounted, 2 m, champagne
- Home /
- GTV Lighting /
- Profile GLAX for LED strip, corner surface-mounted, 2 m, champagne
- Home /
- GTV Lighting +
- Apparecchi di illuminazione /
- GTV Lighting Luminaires +
- Strisce LED, moduli, profili e accessori /
- GTV Lighting LED strips, modules, profiles and accessories +
- Accessori e ricambi per strisce e tubi luminosi /
- Profile GLAX for LED strip, corner surface-mounted, 2 m, champagne
Profile GLAX for LED strip, corner surface-mounted, 2 m, champagne
Informazioni tecniche
| Condizione dell'articolo | Nuovo |
| Nome del produttore | Profile GLAX for LED strip, corner surface-mounted, 2 m, champagne |
| Marchio | GTV Lighting |
| Categorie |
Accessori e ricambi per strisce e tubi luminosi
|
| ETIM | EC002707 |
Dettagli dell'imballaggio
| Livello di imballaggio 1 | 5902801256868 |
| Livello di imballaggio 2 | 5902801445286 |
| Livello di imballaggio 3 | 2012801506085 |
| Livello di imballaggio 4 | 2012801506092 |
Download
Descrizione
The current trend is to move away from light points in favor of linear lighting, based on LED strips.
During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center.
The angular profile is used in the corners of furniture development, most often under hanging cabinets in the kitchen and under the shelves in the dressing room.
In the case of an angular profile, special mounting brackets are used, having small, curved to the center plates that hold the profile in place. It is recommended that the distance between the grips is not more than 1 meter. The mounting brackets are screwed to the selected surface with screw Г 3 with a conical head. It is very important that the diameter of the screw head does not exceed 6 mm.
- Effectively dissipates the heat generated by the LED strip;
- Dedicated milk casing PA-OSMLGLAX-00;
- Dedicated transparent casing PA-OSTRGLAX-00;
- Dedicated black casing: PA-OSCLGLAX-00;
- Standard end cap: PA-ZASGLAXNKKT-90;
- Mounting bracket: PA-SPRGLAXMIC-00;
- The maximum width of the LED strip is 10 mm.