Registrati per sbloccare i tuoi prezzi B2B esclusivi e iniziare ad acquistare. Registrati ora!

Home

OSRAM

FX-QMW-G2-BGPL MOUNTBRACK K20

FX-QMW-G2-BGPL MOUNTBRACK K20

Fuori produzione Non disponibile

Informazioni tecniche

Condizione dell'articolo	Nuovo
Nome del produttore	FX-QMW-G2-BGPL MOUNTBRACK K20
Marchio	OSRAM
ETIM	EC002707

Dettagli dell'imballaggio

Livello di imballaggio 1	4062172342759
Livello di imballaggio 2	4062172342759

Descrizione

FX-QMW-G2-BGPL MOUNTBRACK K20. Mounting module, used for securing ribbon-/hose-/strip light setups onto surfaces without interfering with line-of-light performance. Compatible with light retention frameworks in the G2 series, ensures system stability during operational phases or adjustments. Physical spec first: Form factor small (minimal footprint), made of corrosion-resistant alloy blend w/ surface finish optimized to reduce reflective glare. Heat tolerance above standard operational temps ~125°C max (ambient-dependent). Infill geometry supports stress distribution and load tests up to 7kg. Electrical interactivity almost nil — no on-board circuitry visible, not active piece in system flow (purely mechanical). Conductivity negligible; possible minor influence if mounted within current path but risks deemed low. Connections non-dynamic—static clamp setup verified through manual locking pin specifics from manufacturer guide. Raw tech notes: -SKU: FX-QMW-G2-BGPL-MountBrack-K20. -Compatible dimensions metric-based RAW450 strip lights. -Material composition: 80% alloy composite + 15% siloxane coating. -Clamp interface tension tested: pass limits @ ±8%. -Max mount width clearance recorded at install depth = ≤35mm approx.