Informazioni tecniche
| Condizione dell'articolo |
Nuovo |
| Nome del produttore |
Wireless Powernet phase coupler |
| Marchio |
ELTAKO
|
| Categorie |
Dispositivi bus KNX/Modbus
|
| Paese di origine* |
CN |
|
* Il Paese di origine effettivo può variare in base al lotto di fornitura.
Per confermare il Paese di origine specifico, contatta il tuo referente.
|
| Codice del Sistema Armonizzato |
8526 9200 00
|
| ETIM |
EC001034
|
| Tensione nominale |
230 V |
| Tipo di fissaggio |
DRA (adattatore per guida DIN) |
| Numero di fasi |
3 |
| Sistema bus KNX |
No |
Dettagli dell'imballaggio
| Livello di imballaggio 1 |
4010312311769, 4010312311769 |
| Livello di imballaggio 2 |
4010312311769 |
| Livello di imballaggio 3 |
4010312311769 |
Altri dati tecnici
| Sistema bus radio |
Sì |
| Sistema bus Powernet |
Sì |
| Larghezza in moduli |
1 |
| Altri sistemi bus |
Altro |
| Sistema bus LON |
No |
| Sistema bus radio KNX |
No |
Download
Descrizione
Wireless Powernet phase coupler to transmit wireless telegrams over the 230V power mains. Only 0.2 watt standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. Voltage between the two outer conductors: 400V/50Hz. Frequency range 115-132kHz. The phase coupler increases the capacitive coupling between 2 different outer conductors if, for example, the cables within the installation are not laid in parallel at a distance of at least several metres apart (as ribbon cables or jacketed cables). Caution: The phase coupler may only be connected to the input side of the line circuit-breaker.