Informazioni tecniche
| Condizione dell'articolo |
Nuovo |
| Nome del produttore |
Exxact - USB charger + schuko socket-outlet - 2.4A 16A - anthracite |
| Marchio |
Schneider Electric
|
| Categorie |
Prese elettriche
|
| ETIM |
EC000125
|
| Corrente nominale |
16 A |
| Tensione nominale |
250 V |
| Tipo di fissaggio |
Montaggio da incasso (intonaco) |
| Modello |
Altro |
| Tipo di collegamento |
Morsetto a innesto |
| Adatto per grado di protezione (IP) |
IP20 |
Dettagli dell'imballaggio
| Livello di imballaggio 1 |
3606489429775 |
| Livello di imballaggio 2 |
3606489429773 |
Altri dati tecnici
| Colore |
Grigio |
| Senza alogeni |
Sì |
| Numero di unità |
1 |
| Chiudibile a chiave |
No |
| Con coperchio ribaltabile |
No |
| Protezione superficiale |
Non trattato |
| Con spia luminosa |
No |
| Numero di fasi |
1 |
| Con protezione maggiorata contro i contatti accidentali |
Sì |
| Frequenza |
50 Hz |
| Con interruttore |
No |
| Contatto di protezione |
Sì |
| Campo di marcatura/superficie informativa |
No |
| Meccanismo di espulsione |
No |
| Qualità del materiale |
Termoplastica |
| Inserto centrale ruotato |
No |
| Protezione contro le sovratensioni |
No |
| Protezione differenziale |
No |
| Alimentazione speciale |
Nessuna alimentazione speciale |
| Montaggio isolato |
No |
| Materiale |
Plastica |
| Corrente nominale di cortocircuito |
0 mA |
| Tipo di fissaggio |
Fissaggio con griffe |
| Uscita/visualizzazione |
No |
| Numero RAL (simile) |
0 |
| Resistenza agli urti |
IK01 |
| Trasparente |
No |
| Finitura superficiale |
Opaco |
| Con fusibile fine |
No |
| Con funzione passante |
Sì |
| Larghezza dispositivo |
45 mm |
| Altezza dispositivo |
72 mm |
| Profondità dispositivo |
30 mm |
| Numero di prese commutabili |
0 |
| Con illuminazione funzionale |
No |
| Con illuminazione di orientamento |
No |
| Con alimentatore USB integrato |
Sì |
| Numero di moduli (sistema modulare) |
1.5 |
| Numero di pin attivi (rotondi) |
2 |
| Numero di contatti attivi (piatti) |
0 |
| Pin tondo di messa a terra |
No |
| Profondità min. della scatola da incasso |
0 mm |
| Colore metallizzato |
No |
| Tipo di alimentazione USB |
AA |
| Trattamento antibatterico |
No |
Download
Descrizione
Schneider Electric Exxact USB charger + socket-outlet WDE003179 is a complete product in color anthracite with 1 module. This USB charger + socket-outlet is compatible with range Exxact. This USB charger + socket-outlet enbales USB port and socket-outlet. The outlet pole configuration of this USB charger + socket-outlet is 2P + E with side earth. And it is used for Schuko. The input power of this USB charger is 12W. The protection type is 1 external fuse, against short-circuits, automatic overload protection, automatic restart after ground fault or main power loss, battery charge protection, thermal protection. The fixing mode of this device is by screws and claws. Its mounting box can be recessed into the surface with flush mounting type. The connection terminals are screwless terminals. It is 71 mm in width, 71 mm in height, 44 mm in depth, with an embedding depth of 32 mm. And it reaches IP20 degree of protection too. Besides, it reaches IK04 protection level, protecting against 0.5 joules of impact. The USB charger + socket-outlet is made of PC (polycarbonate), making it as resistant as possible. What's more, it well satisfied the standards of DIN VDE 0620-1, EN/IEC 60950, IEC 60884-1, NEN-EN 50198-2. It obtained CB, FIMKO, KEMA-KEUR, NEMKO, SEMKO, VDE certificate as well. And it is mercury free. And it is halogen free, lead free. Exxact is a wiring range developed from Nordic installation habits. As integrated solutions for energy and comfort controls, there are more than 250 functions and inserts to choose from.