Informazioni tecniche
| Condizione dell'articolo |
Nuovo |
| Nome del produttore |
Connected single switch, base, 10 A, 71 x 71 mm, screw fixing, Zigbee® |
| Marchio |
Niko
|
| Categorie |
Dispositivi bus KNX/Modbus
|
| Paese di origine* |
CN |
|
* Il Paese di origine effettivo può variare in base al lotto di fornitura.
Per confermare il Paese di origine specifico, contatta il tuo referente.
|
| Codice del Sistema Armonizzato |
8536 2010 00
|
| ETIM |
EC001097
|
| Sistema bus KNX |
No |
| Con comunicazione bus |
No |
| Sistema bus LON |
No |
| Sistema bus radio KNX |
No |
| Radio bidirezionale |
No |
Dettagli dell'imballaggio
| Livello di imballaggio 1 |
5413736368392 |
Altri dati tecnici
| Tipo di fissaggio |
Montaggio da incasso (intonaco) |
| Corrente nominale |
10 A |
| Potenza di uscita |
2300 W |
| Tensione nominale d'impiego |
230 V |
| Sistema bus radio |
No |
| Sistema bus Powernet |
No |
| Corrente max. di commutazione |
100 A |
| Altri sistemi bus |
NHC |
| Adatto per carico C |
No |
| Collegamento di fasi diverse possibile |
No |
| Comando locale/manuale |
Sì |
| Grado di protezione (IP) |
IP20 |
| Con indicatore LED |
Sì |
| Espandibile modularmente |
No |
| Modulo bus rimovibile |
No |
| Profondità min. della scatola da incasso |
40 mm |
Download
Descrizione
The connected single Zigbee® switch has a switching contact to switch lighting. It contains a transmitter and receiver that can communicate wirelessly with the wireless smart hub for Niko Home Control (552-00001). You can use the connected single switch to replace a conventional switch. It is equipped with an extension terminal so that, in combination with a conventional push button, it can easily replace multiway or intermediate switching. Please note that you cannot add a LED lighting unit to the conventional push button when you use it as an extension to Zigbee® connected devices. The connected single switch can switch its own contact. Once connected to the wireless smart hub for Niko Home Control (552-00001), it is possible to configure additional functionalities with the Niko Home Control programming software. For example, you can add the switch to a scene or all-off function. This device can also be used in a bus wiring installation in combination with the wireless bridge for Nik