Informazioni tecniche
| Condizione dell'articolo |
Nuovo |
| Nome del produttore |
BMT-DO4 BACnet MS/TP |
| Marchio |
METZ CONNECT
|
| Categorie |
Dispositivi bus KNX/Modbus
|
| Paese di origine* |
DE |
|
* Il Paese di origine effettivo può variare in base al lotto di fornitura.
Per confermare il Paese di origine specifico, contatta il tuo referente.
|
| Codice del Sistema Armonizzato |
8517 6200 00
|
| ETIM |
EC001097
|
| Sistema bus KNX |
No |
| Con comunicazione bus |
Sì |
| Sistema bus LON |
No |
| Sistema bus radio KNX |
No |
| Radio bidirezionale |
No |
Dettagli dell'imballaggio
| Livello di imballaggio 1 |
4250184138761, 4250184138761 |
Altri dati tecnici
| Tipo di fissaggio |
DRA (adattatore per guida DIN) |
| Corrente nominale |
5 A |
| Tensione nominale d'impiego |
24 V |
| Sistema bus radio |
No |
| Sistema bus Powernet |
No |
| Numero max. di contatti di commutazione |
4 |
| Larghezza in moduli |
2 |
| Altri sistemi bus |
Altro |
| Adatto per carico C |
No |
| Collegamento di fasi diverse possibile |
No |
| Comando locale/manuale |
Sì |
| Grado di protezione (IP) |
IP20 |
| Con indicatore LED |
Sì |
| Espandibile modularmente |
No |
| Modulo bus rimovibile |
No |
| Profondità min. della scatola da incasso |
60.6 mm |
Descrizione
The BACnet MS/TP module with 4 digital outputs was developed for decentralized switching tasks. It is suitable for switching electrical components, such as motors, contactors, lamps, louvers, etc. In this case it is necessary to protect the relay contacts by appropriate load-dependent measures. The module is provided with a manual control for manually switching the relays. The outputs can be switched by means of standard objects via a BACnet client. The module is addressed and the baud rate is set by means of two address switches on the front. Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.Connection with screw type terminal blocks