Item condition | New |
Manufacture name | WT060C LED36S/840 PSU L1200 |
Brand | PHILIPS |
Categories |
3Proofs
Ceiling mounting lamps |
Country of origin | CN |
Harmonized System Code | 9405 4231 00 |
Width | 69 mm |
Colour housing | Grey |
Colour rendering index CRI | 80-89 |
Length | 1201 mm |
Height/depth | 59 mm |
Lamp type | LED not exchangeable |
Impact strength | IK08 |
Nominal voltage | 220-240 V |
Degree of protection (IP) | IP66 |
Beam angle | Extreme wide beam >80° |
Colour temperature | 4000 K |
Max. system power | 30 W |
Rated luminous flux according to IEC 62722-2-1 | 3600 lm |
Luminaire efficacy | 120 lm/W |
Packing level 1 | 8710163360096 |
Packing level 2 | 8710163360218 |
Packing level 3 | 8710163360096 |
Protection class | II |
Lamp holder | Other |
Conductor cross section | 2.5 mm² |
Connection type | Other |
Voltage type | AC |
With movement sensor | No |
Type of grid | None |
Type of control gear | LED operating device current-controlled |
With light sensor | No |
Suitable for suspended mounting | Yes |
Number of poles | 2 |
Housing material | Plastic |
Suitable for light line configuration | No |
Suitable for emergency lighting | No |
Light outlet | Indirect |
Light sharing | Symmetric |
Material cover | Plastic, opal |
Emergency power supply integrated | No |
With light source | Yes |
Luminaire with limited surface temperature, sign "D“ according to EN 60598-2-24 | No |
Covering of the luminaire with thermally insulating material possible | No |
Suitable for wall mounting | No |
Suitable for built-in mounting | No |
With control gear | Yes |
Suitable for workplace according to EN 12464-1 | No |
Suitable for surface mounting | No |
Nominal current | 130 mA |
Colour of light | White |
With air slots | No |
Constant light output (CLO) | No |
IFTTT support available | No |
Type of wiring | Ending |
Rated life time L70/B50 at 25 °C | 50000 h |
Colour consistency (McAdam ellipse) | SDCM5 |
Total harmonic distortion | 20 |
Photobiological safety according to EN 62471 | RG0 |
Rated ambient temperature according to IEC62722-2-1 | -20-45 °C |
Filament test according to IEC 60695-2-11 | 850 °C - 30 s |
Dimming 0-10 V | No |
Dimming 1-10 V | No |
Dimming DALI | No |
Dimming DMX | No |
Dimming potentiometer (integrated) | No |
Dimming GPRS | No |
Dimming LineSwitch | No |
Dimming manufacturer's proprietary system | No |
Dimming mains voltage modulation | No |
Dimming phase cut-off | No |
Dimming phase cut-on | No |
Dimming programmable | No |
Dimming RF | No |
Dimming Sine Wave Reduction | No |
Dimming Touch and Dim | No |
Dimming Zigbee | No |
Dimming with push-button | No |
No dim function | Yes |
Light distributor | None |
Dimming depending on control gear | No |
Dimming DSI | No |
Unified Glare Ratio (UGR) | 26 |
Operation by Bluetooth | No |
Compatible with Apple HomeKit | No |
Compatible with Google Assistant | No |
Compatible with Amazon Alexa | No |
Max. number of luminaires per miniature circuit breaker C16 | 24 |
Max. number of luminaires per miniature circuit breaker B16 | 15 |
Dimming DALI-2 | No |
Flickering value Pst LM | 1 |
Stroboscope effect value SVM | 1.6 |
Colour temperature adjustable | No |
Luminous flux adjustable | No |
Beam angle adjustable | No |
Exchangeable control gear | No |
Suitable for ceiling mounting | Yes |
Surface protection housing | Untreated |
Power factor | 0.9 |
**Function Description** This component is a compact circuit breaker designed to prevent overcurrent in electrical systems. It interrupts power flow when the current exceeds specified limits, safeguarding connected devices and preventing fire hazards. **Electrical Specifications** Rated for use in low-voltage applications—suitable for circuits with nominal voltages of up to 240V AC. Offers thermal-magnetic trip functionality: temperature-dependent tripping for overloads, magnetic response for short-circuits. Current ratings vary based on configuration; consult datasheet or markings. **Physical Characteristics** Modular design — DIN-rail mountable, standard width (18mm per pole). Manufactured using flame-retardant materials. Mechanical toggle lever allows easy manual switching of circuit states (ON/OFF). Terminal screws accept wire sizes within allowable range; reference installation guide for specific torque values. Technical Notes & Limitations: - Intended for indoor environments only — no weatherproofing provided. - Trip curve must match system requirements; mismatched types can cause nuisance tripping or insufficient protection. - Maximum tightening torque on terminals: 2 Nm. - Not suitable as the main disconnect switch in line-side configurations. - Ensure compliance with local codes and standards during installation/operation.