Viokef In-ground luminaires

Designers specify Viokef for ground-recessed lighting when the brief calls for sealed housings, honest walk/drive loads, and optics that don’t glare into sightlines. The range covers point accents and wall-washers through to drive-over uplights, with stainless hardware and sealing kits that survive cleaning and freeze–thaw cycles.

viokef in ground luminaires construction and load classes

The viokef in ground luminaires family uses stainless-steel (AISI 316) rings, anodised aluminium bodies, and tempered glass with anti-slip finishes. IP67/IP68 sealing with double O-rings and breathable membranes keeps condensation down; IK08–IK10 impact options are available. Walk-over and drive-over variants are rated with published kN values and maximum tyre speed—use those on drawings to avoid guesswork. In landscape and façade projects, in-ground fittings are usually split by role. For gardens, terraces and residential entrances, designers often choose compact trio in ground luminaires, while campus routes, plazas and commercial access roads with higher performance demands are built on trilux in ground luminaires. Utility yards and service zones are typically equipped with robust thorneco in ground luminaires, and mixed-brand or retrofit estates are frequently upgraded using sylvania in ground luminaires to keep maintenance and spare parts predictable.

viokef buried led lights optics, glare control, and photometry

For accent and façade work, viokef buried led lights ship with narrow/medium/wide beams, wall-grazing ellipses, and tiltable optical engines. Baffles and snoots reduce high-angle glare; CRI 80/90 packages cover 2700–4000 K with static or switchable CCT. Photometry (IES/LDT) is provided so spacing-to-height ratios and target lux can be fixed early.

viokef recessed ground lighting installation and sealing practice

Correct seating makes or breaks longevity. viokef recessed ground lighting installs into polymer or stainless sleeves with gravel beds and drainage below the can—avoid standing water. Cable entries use compression glands (typically M16/M20) sized to jacket Ø; terminals accept ~0.5…2.5 mm² Cu with 8–10 mm strip. Torque values on bezel screws matter—over-tightening distorts gaskets.

viokef outdoor inground fixtures drive gear and electrical data

Driver choices include remote and integral forms; PF ≥ 0.9, THD ≤ 15 %, ripple kept low for cameras. Surge immunity is typically 4–6 kV line-to-earth for exterior circuits, and control options span on/off, 1–10 V, and DALI-2. When scheduling viokef outdoor inground fixtures, document cable run limits to the driver and any dV/dt filtering if long secondaries are planned.

viokef landscape ground lights applications and aiming

Path edges want wide, low glare beams; trees and columns suit narrow uplight with tilt for spill control; façades often need elliptical optics to lift verticals without hot spots. Specify accessories for viokef landscape ground lights—cowls, half-shields, honeycombs—where pedestrian comfort is critical.

viokef architectural inground luminaires materials and finishes

Coastal and poolside sites call for 316 stainless and screws with anti-seize; urban plazas may favour black anodised trim rings to hide soiling. For viokef architectural inground luminaires, fix finish codes and glass types (clear vs sandblasted) alongside load rating so replenishment parts don’t mix appearances or ratings.

viokef waterproof recessed lighting standards and compliance

Ingress per IEC 60529 (IP67/IP68), impact per IEC 62262, drivers to IEC/EN 61347-1/-2-13, control EN 62384, EMC EN 55015/61000; LED packages backed by LM-80 with TM-21 projections. Publish these with viokef waterproof recessed lighting plus ambient limits (often −20…+50 °C) and tc marks for any integral gear.

Selection guide for B2B buyers

1. Fix duty: walk-over vs drive-over; state kN and tyre speed.
2. Choose optic and CCT/CRI; attach IES/LDT and S/H ratios to the layout.
3. Lock sealing: sleeve type, drain detail, gland thread, and torque on bezels.
4. Define control and driver location; include surge level and max lead length.
5. Set materials/finish by environment (316 coastal, anodised urban), then barcode spares (rings, gaskets, glass).

Bankoflamps supply model for Viokef in-ground ranges

Bankoflamps aligns to your buying windows with tailored pricing, quick quotes by EAN/MPN, and live EU stock before you place an order. The portal shows current lead times and shipment status, and lets you download price lists with defined validity periods. Trusted clients have access to post-payment terms up to 30 days. We consolidate consignments so sleeves, luminaires, drivers, glands, gaskets, shields, and labels arrive area-kitted; an account manager reviews load ratings, optics, IP/IK data, gland threads, and torque notes against your documents to keep deliveries immediately usable across France, the Baltics, Germany, Spain, Italy, Belgium, and the Netherlands.