Technical Information
| Item condition |
New |
| Manufacture name |
LB Management motion detector 1.1 m A17180MO |
| Brand |
Jung
|
| Categories |
Switches
Motion & Presence Sensors
|
| Country of origin* |
DE |
|
* The actual country of origin may differ depending on the delivery batch.
To confirm the specific country of origin, please contact your account manager.
|
| Harmonized System Code |
9031 8080 00
|
| ETIM |
EC000138
|
| Mounting method |
Flush mounted (plaster) |
| Max. transmission range frontally |
30 m |
| Max. transmission range sideways |
15 m |
| Mounting height |
1.1 m |
| Detection angle horizontal |
180 ° |
Packing details
| Packing level 1 |
4011377167193, 4011377167193 |
| Packing level 2 |
4011377167193, 4011377167193 |
Other Technical data
| Colour |
Other |
| Model |
Movement sensor |
| Halogen free |
Yes |
| Creep-under protection |
No |
| Staircase monitoring |
No |
| Suitable for wireless transmission |
No |
| Material quality |
Thermoplastic |
| Material |
Plastic |
| Response value sensitivity adjustable |
Yes |
| Dim function with dimmer basic element |
No |
| Diameter detection range on floor |
0 m |
| HVAC-control |
No |
| Constant light control |
No |
| RAL-number (similar) |
0 |
| Teach-function for response value luminosity |
No |
| Networkable |
Yes |
| Operation mode switch |
No |
| Animal zone |
No |
| Min. switch-on time |
120 s |
| Max. duty cycle |
2 min |
| Suitable for degree of protection (IP) |
IP20 |
| Response value luminosity adjustable |
Yes |
| Switch-off delay self-learning |
No |
Downloads
Description
LB Management motion detector 1.1 m A17180MO operates as a flush-mounted plaster motion sensor in low-level switch systems for detecting movement horizontally at up to 180°.It is suitable for basic indoor setups with minimal automation. Flush mounted design, halogen-free thermoplastic housing material.Plastic body construction with RAL similarity unspecified.Horizontal detection angle:180°.Mounting height:1.1 m, max transmission range sideways:15 m, frontally:30 m.Constant light control inactive, response value sensitivity adjustable manually.Response value luminosity adjustable manually as well;no teach-function available for luminosity tuning.No dimmer function setup or combination features applied;operation mode switch disabled too by default logic configuration settings—manual calibration parameters only active on time delay bases via min switch-on time set at precisely 120 s runtime slot delayends while simultaneously max activity cooldown discharge limit before system resetting detectable distinctly two total-minute intervals rearranged cyclic-alert-reset modules internal periodic recalibrate self Dam shut-off negative nothing-end optimised usages,temp-clamps intact technical existing deployments