SILENT-100 CZ (220-240V 50) RE

This component is designed to regulate voltage within an electrical system, ensuring consistent power delivery to connected devices. Its core function is stabilization and protection of downstream components by compensating for fluctuations in input energy. ### Electrical Specifications Input Voltage Range: Accepts DC voltages between 9V and 36V. Output is stabilized at a fixed value depending on configuration. Max load capacity rated at 2A. Efficiency varies by input level but typically around 85–90% under normal conditions. Thermal Management: Passive heatsink design included – no active cooling necessary. Operates reliably within ambient temperatures of -20°C to +60°C under full load, though performance may degrade outside these limits. ## Mechanical Characteristics Enclosure Dimensions: Compact metal housing; footprint measures approximately 4 cm x 3 cm x 1 cm (excluding any protuberances). Includes mounting brackets compatible with standard configurations found in industrial racks or vehicle systems. Connection Interfaces: Standard screw terminals for input/output secured using M3 threads — hand-tightened or torque-wrench applied settings advised during installation for reliable contact points, minimizing resistance issues long-term. ### Technical Notes / Limitations - Not reverse polarity protected; incorrect wiring will result in damage without external safeguards added upstream during circuit design planning. - Intended solely for use with DC systems – unsuitable for AC-based setups even if measurements fall nominally inside specified ranges above. - Emits low-level RF interference when operating under load near peak thresholds; applicable to high-sensitivity signal environments where isolation might be required downstream connections resolve interacting EMI categories sufficiently well outside user recommendations threshold containment per grounding routes pathways designs systems relied adjusted correctly reduce transient-induced effects measurable lab-grade tolerances proportion expectations define default corrected same unapplied manner context gaps isolate priority-known​.