OVR T1-T2 3N 12.5-275s P QS Surge Protective Device

This component is designed to regulate the flow and pressure of fluids in hydraulic systems. It ensures consistent operation within predefined parameters, preventing fluctuations that can disrupt system performance. **Specifications** Material: Constructed from industrial-grade aluminum alloy for durability and corrosion resistance. Can handle high pressures typical of hydraulic applications. Machining allows for tight tolerances required in precision fluid handling. Port Configuration: Equipped with threaded connectors compatible with standard fittings in metric systems—M12 threading present on input/output ports. Suitable for integration into modular setups where adaptability matters. **Performance Range** Operating Pressure: Rated for up to 250 bar — functional across common hydraulic pressures but must not exceed this limit under peak loads or dynamic conditions. Temperature Tolerance: Stated operational range between -20°C and +100°C due to material specifications and seals — unsuitable for extreme conditions beyond stated limits like cryogenic uses or high-heat environments above tolerance range. - Connection thread is M12 format; alternative adapters may be needed depending on connected equipment configurations. - Maintenance requires periodic inspection of internal seals (risk factor if aging past design lifecycle). - Ideal fluid compatibility listed as standard mineral oils; incompatible with glycol-based or synthetic fluids outside spec sheet recommendations. - Weight approximately 2kg — ensure mounting structurally supports added load without strain failure.