Murrelektronik Industrial connections and blocks
Integrated Connectivity for Modern Automation
In every industrial system, wiring defines reliability. Murrelektronik industrial connections and blocks combine terminal technology, heavy-duty connectors, modular systems, plug-and-socket interfaces, and bus modules into one coordinated platform. Instead of treating each link as an isolated part, Murrelektronik engineers them as a network of dependable interfaces — from control cabinets to field equipment. For purchasing teams, this consistency translates to fewer suppliers, unified accessories, and predictable service life.
Inside the Cabinet – Murrelektronik Terminal Blocks
The foundation of any control panel lies in its terminal rows. Murrelektronik terminal blocks handle both signal and power conductors with precision. Push-in and screw-clamp designs fit wires from 0.2 mm² up to 35 mm². Color-coded insulation, integrated test points, and options for jumpers or marking tags simplify commissioning. In long-running production plants, these blocks prove their value by holding torque under vibration and thermal cycling where generic terminals fail.
Between Panels – Murrelektronik Heavy-Duty Connectors
When equipment sections must disconnect quickly, Murrelektronik heavy-duty connectors take over. Zinc-die-cast or reinforced polymer shells, IP67/68 seals, and mixed power-signal inserts keep circuits safe even under oil mist or outdoor humidity. Rated up to 40 A per pole, they replace entire wiring bundles with a single lock-lever housing. The result is faster maintenance and fewer wiring faults during production changeovers.
Flexible Architecture – Murrelektronik Modular Connection Systems
Automation rarely stays static. Murrelektronik modular connection systems let you combine bus couplers, feed-throughs, and terminal inserts within the same frame. When expansion is needed, technicians slide in an additional module instead of rewiring an entire enclosure. This modularity keeps projects scalable and ensures identical spare parts across multiple lines — one reason system integrators standardise on Murrelektronik for long-term projects.
Reliable Field Wiring – Murrelektronik Plug and Socket Systems
For sensor and actuator wiring, Murrelektronik plug-and-socket systems cover M8, M12 and 7/8″ formats with PUR or PVC jackets for static or dynamic use. Versions rated IP69K resist aggressive wash-down or chemical exposure. Pre-moulded cables save assembly time; field-wireable types suit custom lengths. Always verify coding (A, D or X) and connector torque — those details decide whether EMC performance stays stable after thousands of cycles.
Distributed Control – Murrelektronik Bus Connection Modules
Decentralised I/O is now standard. Murrelektronik bus connection modules such as Cube67 and Impact67 link sensors and actuators directly to PROFINET, EtherCAT or CANopen networks. Each module integrates diagnostic LEDs, loop-through 24 V DC power, and robust IP67 enclosures. For maintenance teams, this layout shortens commissioning, reduces cable length, and gives clear visual fault feedback right on the line.
Selection Logic for Procurement Teams
When specifying industrial connection hardware, compare:
- Rated current and voltage – size for inrush peaks, not only nominal load.
- Housing and sealing – PA66 for cabinet use, metal for outdoor or wash-down zones.
- Mounting profile – DIN 35 mm for terminals, standard cut-outs for connectors.
- Serviceability – plug-in modules instead of hard-wired joints.
- Compatibility – one family of accessories across the site reduces stock and training costs.
Skipping these steps leads to mismatched parts, downtime, and non-standard spares.
Factories that switched to Murrelektronik connectors report measurable uptime gains. Food-processing plants using IP69K plug systems eliminated recurring moisture failures. Automotive lines using modular bus blocks cut cabinet wiring hours nearly in half. Each case confirms the same rule: uniform connectivity equals predictable performance.
Why Buy Murrelektronik from Bank of Lamps
- Individual B2B pricing – competitive offers for bulk and repeat orders.
- Personal account manager – one contact from quotation to delivery.
- Real-time stock visibility – across our and partner warehouses.
- Fast online quotes – usually within an hour.
- Ordering by EAN/MPN – copy-paste accuracy for large lists.
- Updated price files – downloadable for ERP integration.
- Transparent lead-time tracking – from confirmation to dispatch.
- Purchase-history access – simplifies reorders and cost control.
- Deferred payment – up to 30 days for trusted clients.
- Cnsolidated shipping – combine products to cut freight costs.