Technical Information
| Preces stāvoklis |
Jauns |
| Ražotāja nosaukums |
Shutter actuator flush-box mount without local input |
| Zīmols |
EATON
|
| Kategorijas |
Bus System Devices (KNX/Modbus)
|
| Izcelsmes valsts* |
CZ |
|
* The actual country of origin may differ depending on the delivery batch.
To confirm the specific country of origin, please contact your account manager.
|
| Harmonizētās sistēmas kods |
8536 5080 00
|
| Montāžas metode |
Iebūvējams vienā līmenī (apmetums) |
| Autobusu sistēma KNX |
No |
| Autobusu sistēma Powernet |
No |
| Maks. žalūziju izeju skaits |
1 |
| Platums moduļu atstarpju skaitā |
3 |
| Citas autobusu sistēmas |
xComfort |
| Vietējā darbība/rokas darbība |
No |
| Ar slēdža funkciju |
No |
| Ar LED indikāciju |
Yes |
Iepakojuma informācija
| Iepakojuma līmenis 1 |
9010653003557 |
| Iepakojuma līmenis 2 |
9010238224131 |
Citi tehniskie dati
| Strāvas veids |
AC |
| Ievadu skaits |
0 |
| Autobusu sistēmas radio bieži |
Yes |
| Maks. pārslēgšanas jauda |
690 W |
| Ar autobusa savienojumu |
Yes |
| Pārslēgšanas strāva (pretestība) |
3 A |
| Autobusu sistēma LON |
No |
| Aizsardzības pakāpe (IP) |
IP20 |
| Autobusu sistēma KNX radio |
No |
| Radio bieži divvirzienu |
Yes |
| Autobusa modulis noņemams |
No |
| Min. iebūvētās instalācijas kastes dziļums |
18 mm |
Apraksts
The flush-mounted shutter actuators are particularly characterized by their slim dimensions and extended control functionality. The actuator control drives of shutters, blinds, shades etc. are equipped with a 230 V AC motor (up to 3 A) and an integrated end-position switch. The device tracks the actual position of the shades and has predefined, selectable profiles to optimize the operation of the to be controlled application, e.g. shutters, slatted blinds, awnings etc. Furthermore, the actuator also provides numerous safety functions such as a safety position in case of wind and / or rain as well as a lockout protection to ensure shutters or blinds will not close if the terrace door is open. The mains-powered solution is typically placed in an installation box and combined with either a socket outlet or a wireless switch. Note: Never connect multiple shading motors in parallel to a single shutter actuator without integrating a cut-off relay.