Wcd.+lader A500 alp.wit penaarde+USB-A

SCHUKO socket with integrated USB power supply for dual-purpose use in electrical systems, combining standard power delivery with USB charging.Flush-mounted design compatible with plaster installations. Device dimensions:55 mm width, 55 mm height.Nominal data:current 16 A, voltage 250 V, frequency unknown.Connection via push-in clamp method.Glossy thermoplastic surface, RAL approximate match 9016 (white).Contains protective earth pin (round).Degree of protection rated IP20;not suitable for heavy conditions per VDE guidelines.Number of active round pins 2;flat pins excluded from functionality count.Halogen-free construction ensures safer environmental qualities during usage scenarios requiring high safety standards. Built-in USB power supply confirmed but unspecified type classification marked as empty in base logs (possibly Type AC in naming assumptions).Enhanced contact protection present for increased operational safety against accidental electrocution and grounding issues observed elsewhere in older models sharing similar part-category distribution overlaps electrically logged outputs lamps/claw screw points tightening promising stiffness structurally événements contributing massively tighter orientations framing installation complete module/socket builds single-phase evaluations passing revamped afterroutine checks tightened phases box requests depth requirement confirmed 48 max minimum installation depths tightened alongside mounting calibration rounds/plug-confirm integration smooth running_pts interplay tightening/module finish gaps inserts stabilizations -> full_ready drafts tighten/manual->log.insert restructure scheduling collect-back),