- Sākums /
- Gaismekļi /
- LED lentes, moduļi, profili un piederumi /
- Gaismas lentes/ šļūtenes/ sloksnes piederumi/ rezerves daļas /
- Profile GLAX for LED strip, corner surface-mounted, 2 m, white
- Sākums /
- GTV Lighting /
- Profile GLAX for LED strip, corner surface-mounted, 2 m, white
- Sākums /
- GTV Lighting +
- Gaismekļi /
- GTV Lighting Gaismekļi +
- LED lentes, moduļi, profili un piederumi /
- GTV Lighting LED lentes, moduļi, profili un piederumi +
- Gaismas lentes/ šļūtenes/ sloksnes piederumi/ rezerves daļas /
- Profile GLAX for LED strip, corner surface-mounted, 2 m, white
Profile GLAX for LED strip, corner surface-mounted, 2 m, white
Technical Information
| Preces stāvoklis | Jauns |
| Ražotāja nosaukums | Profile GLAX for LED strip, corner surface-mounted, 2 m, white |
| Zīmols | GTV Lighting |
| Kategorijas |
Gaismas lentes/ šļūtenes/ sloksnes piederumi/ rezerves daļas
|
Iepakojuma informācija
| Iepakojuma līmenis 1 | 5902801259647 |
| Iepakojuma līmenis 2 | 5902801259661 |
| Iepakojuma līmenis 3 | 2012801264732 |
| Iepakojuma līmenis 4 | 2012801264756 |
Lejupielādes
Apraksts
The current trend is to move away from light points in favor of linear lighting, based on LED strips.
During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center.
The angular profile is used in the corners of furniture development, most often under hanging cabinets in the kitchen and under the shelves in the dressing room.
In the case of an angular profile, special mounting brackets are used, having small, curved to the center plates that hold the profile in place. It is recommended that the distance between the grips is not more than 1 meter. The mounting brackets are screwed to the selected surface with screw Г 3 with a conical head. It is very important that the diameter of the screw head does not exceed 6 mm.
- Effectively dissipates the heat generated by the LED strip;
- Dedicated milk casing PA-OSMLGLAX-00;
- Dedicated transparent casing PA-OSTRGLAX-00;
- Dedicated black casing: PA-OSCLGLAX-00;
- Standard end cap: PA-ZASGLAXNKKT-10;
- Mounting bracket: PA-SPRGLAXMIC-00;
- The maximum width of the LED strip is 10 mm.