- Sākums /
- Gaismekļi /
- LED lentes, moduļi, profili un piederumi /
- Gaismas lentes/ šļūtenes/ sloksnes piederumi/ rezerves daļas /
- Profile GLAX MINI high for LED strip, recessed, 2 m
- Sākums /
- GTV Lighting /
- Profile GLAX MINI high for LED strip, recessed, 2 m
- Sākums /
- GTV Lighting +
- Gaismekļi /
- GTV Lighting Gaismekļi +
- LED lentes, moduļi, profili un piederumi /
- GTV Lighting LED lentes, moduļi, profili un piederumi +
- Gaismas lentes/ šļūtenes/ sloksnes piederumi/ rezerves daļas /
- Profile GLAX MINI high for LED strip, recessed, 2 m
Profile GLAX MINI high for LED strip, recessed, 2 m
Technical Information
| Preces stāvoklis | Jauns |
| Ražotāja nosaukums | Profile GLAX MINI high for LED strip, recessed, 2 m |
| Zīmols | GTV Lighting |
| Kategorijas |
Gaismas lentes/ šļūtenes/ sloksnes piederumi/ rezerves daļas
|
Iepakojuma informācija
| Iepakojuma līmenis 1 | 5902801027475 |
| Iepakojuma līmenis 2 | 5902801045882 |
| Iepakojuma līmenis 3 | 2012801232151 |
Lejupielādes
Apraksts
The current trend is to move away from light points in favor of linear lighting, based on LED strips.
During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center.
The mini mortise profile is used wherever we want to obtain a smooth surface, so that the profile does not collide, for example, with a drawer or the front of the drawer. The use of a high profile reduces the visibility of light points, even when using a strip with a low density of LEDs.
For proper assembly, milling with a width of 15 mm and a depth of at least 12.5 mm should be performed. Special teeth will press against the edge of the plate. The ends of the profile are closed with the help of aesthetic plugs.
Do not use mounting adhesives or silicones for installation.
- Effectively dissipates the heat generated by the LED strip;
- Milk casing PA-OSMLGLAXM-00;
- Transparent casing PA-OSTRGLAXM-00;
- Casing black PA-OSCLGLAXM-00;
- Dedicated cap PA-ZASGLAXMW-00;
- The maximum width of the LED strip is 10 mm.