Reģistrējieties, lai atbloķētu savas ekskluzīvās B2B cenas un sāktu iepirkties. Reģistrējieties tagad!
KNX THERMOST./4-V. DK-INTERF.,WIT,SYST M image 1

Telpas temperatūra kontrolieris KNX, termostats./4-V. Dk-interf., balts, syst M

Tikai pasūtījums
EAN: 3606480351709
MPN: MTN616744
Iepakojums: 1
Cena (bez PVN)
726,97 €
par vienību
Minimālais pasūtījuma daudzums: 1
Paredzamais piegādes laiks mūsu noliktavā: 4-6 weeks
Šī cena ir spēkā līdz nākamajam cenrādim vai kamēr prece ir krājumā

Tehniskā informācija

Preces stāvoklis Jauns
Ražotāja nosaukums KNX THERMOST./4-V. DK-INTERF.,WIT,SYST M
Zīmols Schneider Electric
Kategorijas Maģistrāles sistēmas ierīces (KNX & Modbus)
Izcelsmes valsts* DE
* Faktiskā izcelsmes valsts var atšķirties atkarībā no piegādes partijas. Lai apstiprinātu konkrēto izcelsmes valsti, lūdzu, sazinieties ar savu klientu menedžeri.
Harmonizētās sistēmas kods 9032 1080 00
ETIM EC001101
Montāžas izkārtojums Pamata elements ar centrālo pārsegu
Autobusu sistēma KNX
Autobusu sistēmas radio bieži
Autobusu sistēma Powernet
Ar autobusa savienojumu
Citas autobusu sistēmas Nav
Autobusu sistēma LON
Autobusu sistēma KNX radio
Radio bieži divvirzienu

Iepakojuma informācija

Iepakojuma līmenis 1 3606480351709

Citi tehniskie dati

Montāžas metode Iebūvējams vienā līmenī (apmetums)
Virsmas aizsardzība Neapstrādāts
Ar displeju
Materiāla kvalitāte Termoplasts
Digitālo ieeju skaits 0
Materiāls Plastmasas
Ar pretaizdzīšanas/demontāžas aizsardzību
Manuāla iestatītā punkta iestatīšana
Iespējama paralēlā apkalpošana
Klātbūtnes poga
RAL numurs (līdzīgs) 1013
Aizsardzības pakāpe (IP) IP20
Ar LED indikāciju
Caurspīdīgs
Virsmas apdare Glancēts
Ar vietējo darbību
Enerģijas patēriņš gaidstāves režīmā (saules gaidīšanas režīmā) 0 W
Min. iebūvētās instalācijas kastes dziļums 0 mm

Apraksts

KNX Room temperature control unit, flush-mounted/PI with 4-gang push-button interface. For System M. The device is a room temperature control unit and a binary input. Depending on the operating mode, the current temperature setpoint value and the room temperature, a control value for the heating or cooling control unit is transmitted to the KNX. The temperature can either be recorded by the internal or the external temperature sensor which must be connected to the push-button interface. The push-button interface generates an internal signal voltage for connecting max. four conventional push-buttons or floating contacts. Of these, two inputs can be used to connect low current LEDs. With integrated bus coupler. The bus is connected using a bus connecting terminal. Functions of the room temperature control unit: Controller type: 2-step control, continuous PI control, switching PI control (PWM). Output: continuous in the range 0 to 100% or switching ON/OFF. Controller mode: Heating with one controller output. Cooling with one controller output. Heating and cooling with separate controller outputs. Heating and cooling with one controller output. 2-step heating with 2 control outputs. 2-step cooling with 2 control outputs. Operating modes: comfort, comfort extension, standby, night economy, frost/heat protection. Operation: Setpoint adjustment can be parameterised in the range with adjusting wheel. Presence push-button functions can be parameterised/switched off. Valve protection, controller disable. Push-button interface functions: Switching, dimming, external blinds, valuator (dimming valuator, extension unit for light scenes with/without memory function, temperature valuator, brightness valuator). Push-button interface: up to 4 inputs, 2 of which can be used as outputs and one for connecting the remote sensor. Output voltage: 5 V (SELV). Output current: max. 0.8 mA. Max. cable length: Inputs/outputs max. 5 m, remote sensor max. 50 m. Material: thermoplastic brilliant. Colour: white, glossy.