Reģistrējieties, lai atbloķētu savas ekskluzīvās B2B cenas un sāktu iepirkties. Reģistrējieties tagad!
***KNX Sw.Act. 2x6A w.2 i ts FM image 1

Slēdzis izpildmehānisms KNX W.2, 6 A, 230 V, IP20

Tikai pasūtījums
EAN: 3606480423970
MPN: MTN6003-0002
Iepakojums: 1
Kaste: 40
Cena (bez PVN)
588,83 €
par vienību
Minimālais pasūtījuma daudzums: 1
Paredzamais piegādes laiks mūsu noliktavā: 4-6 weeks
Šī cena ir spēkā līdz nākamajam cenrādim vai kamēr prece ir krājumā

Tehniskā informācija

Preces stāvoklis Jauns
Ražotāja nosaukums ***KNX Sw.Act. 2x6A w.2 i ts FM
Zīmols Schneider Electric
Kategorijas Maģistrāles sistēmas ierīces (KNX & Modbus)
Izcelsmes valsts* DE
* Faktiskā izcelsmes valsts var atšķirties atkarībā no piegādes partijas. Lai apstiprinātu konkrēto izcelsmes valsti, lūdzu, sazinieties ar savu klientu menedžeri.
ETIM EC001097
Autobusu sistēma KNX
Ar autobusa savienojumu
Autobusu sistēma LON
Autobusu sistēma KNX radio
Radio bieži divvirzienu

Iepakojuma informācija

Iepakojuma līmenis 1 3606480423970
Iepakojuma līmenis 2 3606480423978

Citi tehniskie dati

Montāžas metode Iebūvējams vienā līmenī (apmetums)
Nominālā strāva 6 A
Izejas jauda 1200 W
Nominālais darba spriegums 230 V
Autobusu sistēmas radio bieži
Autobusu sistēma Powernet
Maks. pārslēgšanas jauda 1200 W
Maks. pārslēgšanas kontaktu skaits 2
Digitālo ieeju skaits 0
Platums moduļu atstarpju skaitā 0
Maks. pārslēgšanas strāva 6 A
Piemērots C-slodzei
Savienojamas dažādas fāzes
Vietējā darbība/rokas darbība
Aizsardzības pakāpe (IP) IP20
Ar LED indikāciju
Moduļu paplašināšana
Autobusa modulis noņemams
Min. iebūvētās instalācijas kastes dziļums 0 mm
Maks. pārslēgšanas jaudas LED 0 W

Apraksts

KNX 2-gang switch actuator with two inputs for installation in a size 60 switch box. Floating contacts can be connected to the two inputs. The inputs have already been assigned to the corresponding actuators at the factory, enabling operation without programming. Connection to 230 V via a flexible cable, approx. 20 cm long. The inputs and the KNX are connected via a 6-core, approx. 30 cm long, connecting cable. The connecting cable for the inputs can be extended to a max. of 5 m. KNX software functions: Switch actuator functions: Operation as break contact or make contact. Selection of default position on bus voltage failure/recovery. Switch on and/or off delay. Time switch function. Switching. Status feedback. Logic operation. Disable function or priority control. Status feedback object can be inverted. Input function: Free assignment of the switching, dimming, blind and valuator functions. Locking object. Behaviour when bus voltage recovers. Switching: two switch objects per input. Command on rising/falling edge (ON, OFF, TOGGLE, no reaction). Dimming: Single surface and dual-surface operation. Time between dimming and switching and dim step values. Telegram repetition and send stop telegram. Blinds: Command on rising edge (none, UP, DOWN, TOGGLE). Operation concept (Step - Move - Step or Move - Step). Time between short and long operation. Slat adjustment time. Valuator and Scene ext. input: Edge (push-button as make contact, push-button as break contact, switch) and value on edge. Value adjustment via long push-button action for valuator. Scene ext. unit with memory function. Nominal voltage: AC 230 V. Nominal current: 6 A, ohmic load. Switch contacts: 2x make contacts. Nominal output. Incandescent lamps: AC 230 V, max. 1200 W. Halogen lamps: AC 230 V, max. 1200 W. LV halogen lamps: max. 500 VA, wound transformer. max. 500 W, electronic transformers. Capacitive load: AC 230 V, 6 A, max. 14 µF. Inputs: 2. Temperature range: -5 °C to 45 °C. Type of protection: IP 20. Dimensions: 53x53x28 (WxHxD).