Kontakti un pakalpojumi
+371 22 084 444 [email protected]
Kontakti Par mums Piegāde Brands
Reģistrējieties, lai atbloķētu savas ekskluzīvās B2B cenas un sāktu iepirkties. Reģistrējieties tagad!
1- and 2-level wireless repeater image 1
ELTAKO

1- and 2-level wireless repeater

Ir noliktavā: Nē Piegādātāja krājumi: Nē Minimālais pasūtījuma daudzums: 1
Cena (bez PVN):
82,84 €
Šī cena ir spēkā līdz 31.12.25
EAN: 4010312306482
MPN: 30000352
Iepakojums: 1
Paredzamais piegādes laiks mūsu noliktavā (aptuveni): 2-4 weeks

Technical Information

Preces stāvoklis Jauns
Ražotāja nosaukums 1- and 2-level wireless repeater
Zīmols ELTAKO
Kategorijas Bus System Devices (KNX/Modbus)
Izcelsmes valsts CN
Harmonizētās sistēmas kods 8526 9200 00
Nominālais spriegums 230 V
Montāžas metode Virsmas montāža (apmetums)
Autobusu sistēma KNX No
Autobusu sistēma Powernet No
Citas autobusu sistēmas Nav
Autobusu sistēma LON No

Iepakojuma informācija

Iepakojuma līmenis 1 4010312306482, 4010312306482
Iepakojuma līmenis 2 4010312306482
Iepakojuma līmenis 3 4010312306482

Citi tehniskie dati

Autobusu sistēmas radio bieži Yes
Aizsardzības pakāpe (IP) IP20
Autobusu sistēma KNX radio No

Lejupielādes

Links uz ražotāju mājaslapu

Apraksts

1 and 2 level wireless repeater with small antenna and with antenna FA250. Only 0.6 watt standby loss. A wireless antenna FA250 is connectable as required. Mounting in the 230V power supply cord, e.g. in false ceilings. 100mm long, 50mm wide and 25mm deep. This repeater is only needed if the building conditions prevent undisturbed reception or the ­distance between the wireless pushbutton and receiver is too great. Antenna FA250 with 250cm cable is connectable instead of the enclosed antenna. The range can be extended considerably by placing it in the optimum position. The 1-level mode is activated ex works. Only wireless signals from sensors are received, tested and retransmitted at full transmit power. Wireless signals from other repeaters are ignored to reduce the data volume. Use the rotary switch to switch over to 2 level mode. Then the wireless signals from ­sensors and from another 1 level repeater are processed. A signal may therefore be received and amplified twice. The LED indicates incoming wireless signals by flashing briefly. Wireless repeaters need not be taught-in. They receive and amplify signals from all wireless sensors within their reception area.