Reģistrējieties, lai atbloķētu savas ekskluzīvās B2B cenas un sāktu iepirkties. Reģistrējieties tagad!
Impulse switch for installation in lighting fittings, 1 NO contact 10A
Ir noliktavā: Nē
Piegādātāja krājumi: Nē
Minimālais pasūtījuma daudzums: 1
Cena (bez PVN):
37,12 €
EAN: 4010312101063
MPN: 60100055
Iepakojums: 1
Paredzamais piegādes laiks mūsu noliktavā (aptuveni):
4-6 weeks
Technical Information
| Preces stāvoklis | Jauns |
| Ražotāja nosaukums | Impulse switch for installation in lighting fittings, 1 NO contact 10A |
| Zīmols | ELTAKO |
| Kategorijas |
Releji
|
| Izcelsmes valsts | CN |
| Harmonizētās sistēmas kods | 8536 5080 00 |
| Montāžas metode | Citi |
| Funkcija | Citi |
| Vadības spriegums 1 | 12-24 V |
| Vadības sprieguma veids 1 | AC/DC |
| Barošanas sprieguma sprieguma veids | AC |
| Barošanas spriegums | 250 V |
| Nominālā slēdža strāva | 10 A |
| Kontaktu skaits kā parasti atvērtam kontaktam | 1 |
Iepakojuma informācija
| Iepakojuma līmenis 1 | 4010312101063, 4010312101063 |
| Iepakojuma līmenis 2 | 4010312101063 |
| Iepakojuma līmenis 3 | 4010312101063 |
Citi tehniskie dati
| Iebūvēts dziļums | 28 mm |
| Platums moduļu atstarpju skaitā | 2.22 |
| Piemērots manuālai darbībai | No |
| Maks. kvēlspuldžu slodze | 500 W |
| Maks. slodzes dienasgaismas spuldze (Duo ķēde) | 1000 VA |
| Kontaktu skaits kā parasti slēgtam kontaktam | 0 |
| Kontaktpersonu skaits kā maiņas kontaktpersona | 0 |
Lejupielādes
Apraksts
For installation in lighting fittings. 1 NO contact not potential free 10A/250V AC. 230V LED lamps up to 200W, incandescent lamp load up to 500W. Standby loss 1 watt only. Built-in device for installation. 85mm long, 40mm wide, 28mm deep. With integrated transformer to galvanically separate the control circuit from the switching circuit to comply with the requirements for safety extra low voltage (SELV) to EN 60669-2-2. As of production week 18/18, compliance is fulfilled with the safety requirements of 2x MOPP to EN 60601-1. Activation by internal voltage or external control voltage of 12 to 24V UC, control current 10mA at 24V. Continuous power supply 230V. A circuit breaker of max. 10A is required. Incandescent lamps and halogen lamps load up to 500W1) and fluorescent lamps with conventional ballast units in lead-lag circuit up to 1000VA. Fluorescent lamps with conventional ballast units parallel compensated 300VA. Temperatures at the mounting location between -20°C and +50°C. Min. command pulse duration/command pause 20/300ms. Connections on the low voltage side: 4-pole pin receptacle for STOCKO MKF 13264-6-0-404 plug, 230V connections: 6-pole terminal strip with plug-in terminals. max. conductor cross section 2.5mm2. One STOCKO plug comes with each device. 1) For lamps with 150W max.