Technical Information
| Preces stāvoklis |
Jauns |
| Ražotāja nosaukums |
CPW-E12, 230 V AC, 1 - 10 A |
| Zīmols |
METZ CONNECT
|
| Kategorijas |
Monitoring Relays
|
| Izcelsmes valsts* |
DE |
|
* The actual country of origin may differ depending on the delivery batch.
To confirm the specific country of origin, please contact your account manager.
|
| Harmonizētās sistēmas kods |
9030 3320 00
|
| Fāžu secības uzraudzība |
No |
| Fāzes nelīdzsvarotības uzraudzība |
No |
| Elektriskā pieslēguma veids |
Skrūvju savienojums |
| Kontaktu skaits kā parasti slēgtam kontaktam |
0 |
Iepakojuma informācija
| Iepakojuma līmenis 1 |
4250184121039 |
| Iepakojuma līmenis 2 |
4250184121039 |
Citi tehniskie dati
| Platums |
22.5 mm |
| Augstums |
75 mm |
| Dziļums |
95 mm |
| Ar noņemamām skavām |
No |
| Fāzes atteices noteikšana |
No |
| Funkcija zem sprieguma noteikšanas |
No |
| Sprieguma noteikšanas funkcija |
No |
| Kontaktu skaits kā parasti atvērtam kontaktam |
0 |
| Kontaktpersonu skaits kā maiņas kontaktpersona |
1 |
Apraksts
The cosPhi monitor is used for detecting underload. The response value and the response time can be adjusted. It can also be used in combination with a frequency converter (frequency: 2 to 200 Hz). Monitoring is accomplished by recognizing the phase shift between current and voltage. This phase angle varies depending on the motor load. The functions can be adjusted by means of bridges S1 - S2 - S3: S1 - S2 open = relay deactivated with underload, S1 - S2 bridged = relay activated with underload, S1 - S3 open = with fault memory, S1 - S3 bridged = without fault memory. The module can be unblocked remotely by means of a closing contact on S1 - S3. If there is a fault memory (no bridge over S1-S3), the fault message is active until it is acknowledged or the supply voltage is interrupted.