Technical Information
| Preces stāvoklis |
Jauns |
| Ražotāja nosaukums |
analogue act. 4-g KNX DRA |
| Zīmols |
Gira
|
| Kategorijas |
Bus System Devices (KNX/Modbus)
|
| Izcelsmes valsts* |
DE |
|
* The actual country of origin may differ depending on the delivery batch.
To confirm the specific country of origin, please contact your account manager.
|
| Harmonizētās sistēmas kods |
8542 3190 00
|
| Montāžas metode |
DRA (adapteris uz DIN sliedes) |
| Modelis |
Pamatnes modulis |
| Izvadu skaits |
4 |
| Autobusu sistēma KNX |
Yes |
| Autobusu sistēmas radio bieži |
No |
| Autobusu sistēma Powernet |
No |
| Citas autobusu sistēmas |
Nav |
| Autobusu sistēma LON |
Yes |
| Izejas spriegums |
24 V |
| Ar LED indikāciju |
No |
| Izejas strāva |
0-2 mA |
Iepakojuma informācija
| Iepakojuma līmenis 1 |
4010337010708 |
Citi tehniskie dati
| Ar autobusa savienojumu |
Yes |
| Platums moduļu atstarpju skaitā |
4 |
| Aizsardzības pakāpe (IP) |
IP20 |
| Autobusu sistēma KNX radio |
No |
| Min. iebūvētās instalācijas kastes dziļums |
0 mm |
Apraksts
Analogue actuator, 4-gang for KNX DRA plus Features: 4-gang DRA analogue actuator with integrated bus coupler converts KNX telegrams (1-byte and 2-byte) into analogue output signals. These analogue output signals enable heating, air conditioning and ventilation actuators to adapt their initial parameters based on bus information, and to participate in control processes. Voltage outputs with short-circuit protection. The initial state is indicated by the status LED. The initial parameters can be restrained. Switch off outputs not required. The four outputs are parameterised to voltage or current signals by the software.