Fast charging station Schneider Electric EVlink, DC fast charger, 24 kW, CHAdeMO connector, wall mount
Technical Information
| Item condition | New |
| Manufacture name | Fast charging station, EVlink, DC fast charger, 24 kW, CHAdeMO connector, wall mount |
| Brand | Schneider Electric |
| Categories |
Mounting racks for electric vehicles
|
| Number of earth leakage circuit breakers type A | 0 |
| Number of earth leakage circuit breakers type B | 0 |
| Max. power per charging point | 24 kW |
| Number of vehicle connectors Type 1 | 0 |
| Number of vehicle connectors CHAdeMO | 1 |
| Installation side connection model | 3-phase |
Packing details
| Packing level 1 | 3606489778880 |
Other Technical data
| Mounting method | Wall mounting |
| Width | 507 mm |
| Height | 860 mm |
| Depth | 250 mm |
| Housing material | Steel |
| Nominal connection power | 24 kW |
| Impact strength | IK10 |
| Degree of protection (IP) | IP55 |
| Number of CEE socket outlets | 0 |
| With communication interface | Yes |
| Function access control | Yes |
| Number of charging units | 1 |
| With house connection box | No |
| Number of vehicle connectors Type 1 CCS | 0 |
| Number of vehicle connectors Type 2 | 0 |
| Number of vehicle connectors Type 2 CCS | 0 |
| Number of socket outlets Type 2 | 0 |
| Number of vehicle connectors GB AC | 0 |
| Number of vehicle connectors GB DC | 0 |
| Number of socket outlets GB | 0 |
| Number of socket outlets Type 3 | 0 |
| Number of household socket outlets | 0 |
| With load management | No |
| With energy meter | No |
| With circuit breaker | No |
Downloads
Description
Fast charging point for EVs using Schneider Electric's EVlink system. Delivers DC fast charging at 24 kW. Compatible with CHAdeMO protocol, designed for wall mounting. Simplifies integration into commercial or private EV charging networks.
Operates on direct current output, nominal power of 24 kW ensures rapid charge cycles for compatible electric vehicles, intended mainly as a fixed installation due to wall-mount design. Requires electrical hookup considerations depending on location and infrastructure; check local codes since high-power outputs may involve additional compliance measures.
Sturdy industrial casing supports outdoor use but verify environmental limits. CHAdeMO connector pre-installed—not swappable unless using approved hardware mods from Schneider documentation (no clear guidance mentioned in quick glance at datasheets). Mounting kit included in standard package; re-check all surface compatibility before start of install—wall specs matter big time.
Technical notes:
- Input voltage: ~400 V AC required (3-phase), max 50 Hz frequency tolerance range.
- Output type: DC only, configured for CHAdeMO standard with safety lockout features built-in.
- Dimensions: ~650 mm x 480 mm x 250 mm (approx., double-check). Weight unspecified but heavy enough to need secure mount brackets or reinforcements during installation planning.
- Operating temp window -25°C to +45°C, IP54 rating dust/water-resistant but no submersion allowed per manual guidelines.