Technical Information
| Item condition |
New |
| Manufacture name |
Emergency lighting units |
| Brand |
Tridonic
|
| Categories |
Emergency units for luminaires
|
| Protection class |
II |
| Width |
43 mm |
| Height |
30 mm |
| Power |
32.5 W |
| Length |
130 mm |
| Lamp type |
LED |
| Wiring system |
Continuous circuit/emergency circuit |
| Nominal voltage |
220-240 V |
| Degree of protection (IP) |
IP20 |
| With remote switch connection |
Yes |
| Monitoring equipment |
Other |
| Nominal operation time |
1-3 h |
Packing details
| Packing level 1 |
9006210696133 |
Description
Combined emergency LED driver for manual testing ¦ For self-contained emergency lighting ¦ Can be either used build-in or independent with clip-on strain-relief (see accessory) ¦ Max. output power 32 W ¦ EM = Emergency ¦ Nominal lifetime up to 100,000 h ¦ 5 years guarantee (conditions at www.tridonic.com) ¦ Adjustable output current between 350 and 700 mA via I-SELECT 2 plugs ¦ Protective features (overtemperature, short-circuit, overload, no-load, input voltage range) ¦ Suitable for emergency escape lighting systems acc. to EN 50172 ¦ 1 or 3 h rated duration depending on connected battery ¦ Constant power output in emergency mode ¦ Intelligent charge system ¦ Deep discharge protection ¦ Temperature protection ¦ Polarity reversal protection for battery provided by 3-pole connector ¦ LiFePO4 batteries with Tridonic LiFeGuard ¦ Temperature-protected ¦ Overcharge-/Overdischarge protection ¦ Ensures safety in use ¦ Up to 8 year design life ¦ 3 years guarantee (conditions at www.tridonic.com) ¦ For battery compatibility refer to data sheet, battery selection