COMPACT Splicing Connector for all conductor types max. 4 mm² transpar
Technical Information
| Item condition | New |
| Manufacture name | COMPACT Splicing Connector for all conductor types max. 4 mm² transpar |
| Brand | WAGO |
| Categories |
Push-In Terminals
|
| Country of origin | DE |
| Harmonized System Code | 8536 9010 00 |
| Nominal current | 32 A |
| Nominal voltage | 450 V |
| Number of clamp positions | 2 |
| Suitable for solid core | Yes |
| Conductor cross section solid (solid, stranded) | 0.2-4 mm² |
| AWG-range | 12-24 |
| Nominal cross section | 0.2-4 mm² |
| Suitable for multi-wire core | Yes |
| Suitable for flexible core | Yes |
| Transparent | Yes |
| With operation lever | Yes |
Packing details
| Packing level 1 | 4050821808435 |
| Packing level 2 | 4050821808435 |
Downloads
Description
This component is an electronic ballast designed to regulate and supply power to compatible fluorescent or discharge lamps in lighting systems. It ensures stable operation, controls current flow, and improves energy efficiency by optimizing lamp performance. **Electrical Specifications** Input voltage range: Supports variable line voltage, typically between 220-240V AC depending on model variation. Power factor correction included for efficiency in commercial installations. Maximum output load limited to rated wattage capacity – oversizing leads to system failure risk. **Thermal & Environmental Operation** Temperature-tolerant up to manufacturer-specified limits; ambient operating temperature typically between -20°C and +50°C. Not suitable for environments with high condensation or exposure beyond IP classification thresholds (check datasheets). Passive cooling mechanism integrated – external heatsinks not required under normal conditions. - Designed specifically for T8 or compatible linear fluorescent tubes within specified ranges. - Must comply with EMC directives when installed alongside other interference-sensitive devices. - Basic mounting options; screws/slots provided but install constraints common due to housing dimensions. - Output distortion factors minimized – total harmonic distortion below typical values (<20%).
Similar items
Alternative EAN
Accessories
Replaces
