Register to unlock your exclusive B2B prices and start shopping. Sign up now!
Basic unit 1 SIMOCODE pro C, PROFIBUS DP interface 12 Mbit/s, RS 485, 4 I/3 Q
In vendor's stock
Price (excl. VAT):
343,24 €
per pcs
EAN: 4011209593824
MPN: 3UF7000-1AU00-0
Box: 1
Estimate delivery time at our warehouse (approx.):
4-6 weeks
Technical Information
| Item condition | New |
| Manufacture name | Basic unit 1 SIMOCODE pro C, PROFIBUS DP interface 12 Mbit/s, RS 485, 4 I/3 Q |
| Brand | Siemens |
| Categories |
Motor Management Devices
|
| Country of origin* | DE |
| * The actual country of origin may differ depending on the delivery batch. To confirm the specific country of origin, please contact your account manager. | |
| Harmonized System Code | 8537 1098 00 |
| Number of digital inputs | 4 |
| Number of analogue inputs | 0 |
| Number of analogue outputs | 0 |
| Rated control supply voltage at AC 50 Hz | 110-240 V |
| Rated control supply voltage at AC 60 Hz | 110-240 V |
| Rated control supply voltage at DC | 110-240 V |
| Degree of protection (IP) | IP20 |
| Number of electronic outputs | 0 |
| Number of outputs, with contact | 3 |
| Type of electrical connection for auxiliary- and control current circuit | Screw connection |
| Input for analogue temperature sensor | No |
| Input for earth fault detection | No |
| Input for thermistor connection | Yes |
| Voltage detection module | No |
| Current detection module | Yes |
| Voltage type for actuating | AC/DC |
Packing details
| Packing level 1 | 4011209593824 |
Description
This component is a precision-engineered timing belt. It transfers rotational motion between two or more shafts, maintaining synchronized movement and mitigating slippage. Essential for systems where accurate positioning or consistent torque transmission is required.
### Material & Construction
Made from durable rubber composite with embedded tensile cords for enhanced strength under tension. Teeth are precision-molded to fit corresponding pulleys securely and prevent skipping during operation. Resistant to wear, moderate heat exposure, and controlled environmental conditions.
### Load Performance & Compatibility
Designed for light-to-medium mechanical loads in industrial automation setups, conveyor systems, or small machinery drive trains. Optimal performance within specified speed thresholds — not suited for high-torque applications without risk assessment.
### Technical Notes/Limitations:
- Suitable operating temperature range: -20°C to +80°C (avoid exposure outside this range).
- Standard pitch design; verify pulley compatibility before use.
- Not designed for direct contact with oils, solvents, or corrosive chemicals — may degrade over time if exposed.
- Tensile strength dependent on proper installation tension; do not exceed 5% elongation under load.