ABB Signalling Devices
When a machine needs to get your attention fast, light and sound are still the best tools. ABB optical and acoustic signalling devices do exactly that — they flash, buzz, ring, and warn in the most direct way possible. You see it, you hear it, and you react. Simple, but absolutely essential for safety and control in modern industry.
Signal tower lights — the universal language of automation
Walk through any factory, and you’ll spot those stacks of color glowing above machines. Green for run, yellow for wait, red for stop. That’s ABB signal tower lights, and they’ve become the universal language between operators and equipment.
ABB’s tower lights are modular — each color section clicks neatly on top of another. You can combine static or flashing lights, add buzzers, or change sequences without tools. Inside, high-efficiency LEDs keep the brightness strong but power draw low. They don’t fade or overheat, even when running all day, every day.
The light spread is wide enough for large halls, visible from 30 meters away, and color clarity stays sharp even under daylight or fluorescent glare. That’s real design — made for work, not just aesthetics.
Beacons, sounders, and sirens that break through the noise
Sometimes light alone isn’t enough. In a loud plant or outdoor area, sound carries the message faster. ABB’s beacons and sounders — and their sirens and flash beacons — are built to cut through that industrial chaos.
They produce up to 120 decibels of clear, penetrating sound, without distortion or weird tones that blend into background noise. The sirens use precise frequency shaping, so your brain registers it instantly as an alarm, not just “another machine sound.”
The flash modules sync with the sound perfectly. No delays, no mismatched pulses. The light output is bright but controlled — the kind that alerts without blinding. It’s obvious, direct communication between system and operator.
Optical-acoustic signalling devices that survive real conditions
The ABB optical acoustic signalling devices are designed for hard environments — oil, dust, vibration, outdoor moisture, heat. The housings are tough polycarbonate or powder-coated aluminum, sealed up to IP66. The gaskets don’t dry out, and the electronics are potted against humidity.
Each unit passes serious testing: salt spray, UV exposure, temperature cycling, drop resistance. ABB engineers build them expecting years of service without degradation. That’s why you still see ten-year-old ABB beacons working just like new.
And maintenance is simple — the modules are serviceable, parts standardized. Swap a lens, replace a sounder, or expand a tower stack without rewiring.
Visual and audible alarms that don’t miss a beat
When something goes wrong, every second counts. ABB visual and audible alarms make sure that second isn’t wasted. They respond instantly to triggers from control systems or sensors — no lag, no missed pulses. The light output stays stable across voltages, and the electronics are surge-protected.
These alarms integrate smoothly into automation networks, safety systems, and fire panels. The connection terminals are solid, marked clearly, and built for quick wiring. No guessing, no weak joints.
They’re used in all kinds of setups — from factories and energy plants to warehouses, tunnels, parking systems, even offshore platforms. Any place that needs a clear signal when conditions change.
Why installers stick with ABB
Installers like ABB’s signalling gear because it simply doesn’t quit. It mounts cleanly, looks professional, and works under pressure. You can throw dust, vibration, or cold at it — it’ll still flash, still sound, still warn. That’s why ABB products often outlive the machines they’re attached to.
And when you need replacements, the footprint’s the same. You don’t have to redesign a panel or re-drill a mounting base. You just unbolt the old one, drop in the new, reconnect — done.
B2B and wholesale supply across Europe
At Bank of Lamps, we keep a steady stock of ABB signal tower lights, beacons and sounders, sirens and flash beacons, and full optical acoustic signalling devices for industrial and commercial applications. Bulk orders, flexible MOQ, fast logistics — all tailored for B2B clients across Europe: Germany, France, Netherlands, Baltics, Spain, UK.