Weidmüller LED modules
weidmuller led modules overview and range
Built for control cabinets, machine frames and inspection stations, these are compact 24 V DC boards and bars that deliver clean, neutral-white light where technicians actually work. Weidmüller structures the range by form factor (rigid sticks vs. compact boards), output class (300–2500 lm), protection (IP20 for enclosures, up to IP65 for splash zones) and connection style (M8/M12 plug-in or push-in terminals). Typical buyers are panel shops, OEMs and MRO teams who want predictable lengths, repeatable wiring and accessories that arrive in the same pick.
weidmuller lighting modules families and sizes
Expect three clear families. Slim rigid bars in 150, 300, 500, 700 and 1000 mm for straight runs along terminal rows; compact board modules that tuck under HMI hoods and shelves; and linkable sticks with through-wiring to feed two or three lamps from a single drop. Housings are anodised aluminium or reinforced polymer; lenses in clear (punchy) or frosted (glare-controlled). Popular sellers: 500 and 700 mm bars with M12 ends—easy to standardise across cabinets.
weidmuller linear led modules for cabinets and machines
Rigid bars mount with clip-feet to TS35 rails or with screw tabs to the back-plate; swivel brackets aim the beam so tags and conductor colours pop. Electrical is simple: 24 V DC, polarity-safe, with end-to-end link cables to keep wiring short. Door switches, inline rockers or sensor kits handle control. Installers like magnetic feet for retrofit—stick, aim, tighten later when the wiring’s done.
weidmuller high power led modules for task and area light
Where you need punch on deep machines or wide work cells, step up to higher-output bars with better thermal paths. These keep their output in warm enclosures and survive vibration on moving frames. Use frosted optics on glossy paint to reduce hotspots; keep a small air gap around the heat spreader and avoid parking them above VFD stacks.
Key features and ordering specs that matter
- Supply 24 V DC from the control rail; leave ±20% PSU headroom when daisy-chaining.
- Protection IP20 for closed cabinets; IP54–IP65 where splash or dust exists; end caps maintain rating.
- Optics wide, even fill for reading markers; clear or frosted lenses depending on glare tolerance.
- Connections M8/M12 plug-in, push-in blocks or captive leads; through-wiring kits cut homeruns.
- Mounting clip, screw or magnetic; bracket sets share the same hole pattern across lengths.
- Packaging single lamps; accessories in 5s/10s so stores can pre-kit a build bin.
Applications and compatibility
Use inside MCCs and I/O enclosures, under HMI shelves, along inspection benches and on machine gantries. Pair with Weidmüller 24 V power supplies, push-in terminals, DIN rails, wire duct and EMC glands for tidy, compliant routing. When bills call for camera or sensor wiring nearby, keep lighting on the control rail and segregate from motor feeds to dodge noise complaints.
Integration with other Weidmüller products
Modules share M8/M12 families with sensors, so your spare cords fit both. Marker carriers match the brand’s terminal labelling, which keeps IDs consistent from lamp to schematic. PE bonding lands on the same earth bars as your I/O; shield clamps at the gland plate keep 360° continuity right where cables enter.
Selection criteria for B2B clients
- Environment and IP. IP20 for closed panels; IP65 with sealed end caps in washdown or dusty bays.
- Beam and brightness. 300–700 lm for small doors; 1200–2000+ lm for deep frames and task zones.
- Mounting method. Clips and magnets speed retrofits; screw brackets win on vibrating equipment.
- Connector strategy. Standardise on M12 if you stock it; push-in blocks for permanent wiring and lowest cost.
- Chain length and current. Check total draw per feed; avoid voltage drop on long daisy-chains.
- Kit completeness. Order brackets, end caps, link leads and a door switch with each lamp so the crew finishes in one pass.
Advantages of working with Bankoflamps
You get individual B2B pricing and custom offers, a personal account manager and real-time stock visibility across EU warehouses. Quotes return fast (about an hour). Ordering by EAN/MPN is straightforward, with downloadable price lists that stay current. We provide lead-time tracking, order-status updates and purchase-history analytics, plus post-payment up to 30 days for trusted clients. Consolidated shipment management trims delivery costs with stable pricing under validity dates. We actively serve France, the Baltics, Germany, Spain, Italy, Belgium and the Netherlands.